OEM 2008 Cadillac CTS Wheel Bearing

2008 Cadillac CTS Parts Questions & Experts Answers

• Q: How to replace the rear wheel bearing and hub on 2008 Cadillac CTS?

  A: After proper vehicle lifting you need to detach the tire and wheel to replace the rear Wheel Bearing hub assembly. Begin by detaching the wheel drive shaft then take out the Wheel Speed Sensor from the rear position. Follow the front wheel drive shaft replacement left side steps for the left wheel drive shaft and apply the right side method to the right side drive shaft. Use a tool to press the outer CV Joint inside when necessary before taking off the rear brake rotor from the Wheel Bearing unit to install the new wheel drive shaft. Take out all Wheel Bearing/hub assembly bolts then pull the assembly out of the knuckle. Install the rear Wheel Bearing/hub assembly in the knuckle after positioning it in place then put wheel drive axle in the assembly. Hold the mounting bolts by hand before tightening them to 135 n.m (100 lb ft). Affix the knuckle bolt to the upper control arm before adding the brake rotor behind it. Install the wheel drive shaft nut based on correct procedures for either left or right side wheels. Put back the rear Wheel Speed Sensor followed by wheel and tire reinstallation. End the process by lowering the car after erasing its supports.