How to replace an emblem or nameplate on 2008 Cadillac STS?

Before putting on a new emblem you need to cover and tape your surface then set alignment tape for installation. Apply a J 25070 (Heat Gun) at 152mm distance and rotate it in circles over the surface of the emblem or nameplate for 30 seconds to warm it up. Use a plastic flat tool for gentle removal of the emblem or nameplate. Use a 3M(TM) P/N 07501 molding adhesive remover disk for body panels or a lint-free cloth with VMP naphtha and 50/50 isopropyl alcohol for plastic panels to get rid of adhesives. Wipe the installation space with the cleaned cloth and solution until it becomes entirely dry. Apply tape over the installation area and label it when no markings exist. The J 25070 (Heat Gun) should raise mounting surface temperature to 27-41 degrees Celsius (80-105 degrees Fahrenheit). Press the emblem or nameplate into position at between 85 and 90 degrees Fahrenheit once the adhesive backing reaches 85 to 90 degrees Fahrenheit. Put the nameplate or emblem onto the designated spot by matching the marks before pressing it hard onto the surface and apply uniform pressure across the whole bond area. After that, take away the protective tape from the area where you want to install the badge.

OEM 2008 Cadillac STS Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Emblems found

View related parts
2008 Cadillac STS Emblem, Front Part Number: 15263150
$72.20 MSRP: $107.45
You Save: $35.25 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15263150
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Emblem Part Number: 25767581
$4.83 MSRP: $6.92
You Save: $2.09 (31%)
ADD TO CART
Product Specifications
- Other Name: Emblem, Tail Lamp
- Replaces: 25739125
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 3.0 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25767581
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Emblem, Front Part Number: 15851892
$108.14 MSRP: $154.73
You Save: $46.59 (31%)
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Fender Name; Nameplate; Emblem,Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate; Emblem, Front Side Door
- Position: Front
- Replaces: 25754866
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.9 x 1.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15851892
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac STS Center Cap, Black Part Number: 9596629
$47.99 MSRP: $68.66
You Save: $20.67 (31%)
ADD TO CART
Product Specifications
- Other Name: Cap-Hub Polished 19" Wheels *Black Backgr; Wheel Center Cap; Hub Cap; Emblem; Emblem, Wheel Cover Appearance; Cap, Wheel - Front And Rear; Cap, Wheel Trim
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.8 x 4.7 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9596629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac STS Emblem Part Number: 84689784
$11.20 MSRP: $16.67
You Save: $5.47 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.
- Replaces: 15223483, 15223484
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84689784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Nameplate Part Number: 89045021
$84.71 MSRP: $141.21
You Save: $56.50 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Instrument Panel
- Item Weight: 0.50 Pounds
- Item Dimensions: 17.9 x 2.0 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89045021
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Emblem, Front Part Number: 10376727
Product Specifications
- Other Name: Emblem Assembly-Front Bumper Fascia; Emblem, Bumper/Fascia
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 5.6 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10376727
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac STS Nameplate, Rear Part Number: 10387855
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Emblem, End Gate And Rear Door Decoration; Emblem,Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Replaces: 10372469, 25739124, 25762472
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.9 x 1.6 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10387855
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Emblem Part Number: 25767582
Product Specifications
- Other Name: Emblem, High Mount Stop Lamp; Emblem, Tail Lamp
- Replaces: 25739126
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.4 x 1.8 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25767582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Nameplate, Front Part Number: 15810646
$63.71 MSRP: $94.82
You Save: $31.11 (33%)
Product Specifications
- Other Name: Emblem, Front Side Door
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 14.6 x 1.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15810646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2008 Cadillac STS Spacer, Front Part Number: 25786165
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.0 x 6.3 x 0.9 inches
- Condition: New
- SKU: 25786165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Nameplate Part Number: 89045020
Product Specifications
- Other Name: Emblem, Instrument Panel
- Item Weight: 0.50 Pounds
- Item Dimensions: 18.3 x 2.0 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89045020
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Nameplate Part Number: 89045022
Product Specifications
- Other Name: Emblem, Instrument Panel
- Item Weight: 0.50 Pounds
- Item Dimensions: 17.7 x 2.0 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89045022
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Nameplate, Rear Part Number: 10334040
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.3 x 1.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10334040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac STS Emblem, Front Part Number: 25791152
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.8 x 6.5 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25791152
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2008 Cadillac STS Emblem

With a comprehensive array of OEM 2008 Cadillac STS Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac STS Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac STS Emblem Parts Questions & Experts Answers

Q: How to replace an emblem or nameplate on 2008 Cadillac STS?
A: Before putting on a new emblem you need to cover and tape your surface then set alignment tape for installation. Apply a J 25070 (Heat Gun) at 152mm distance and rotate it in circles over the surface of the emblem or nameplate for 30 seconds to warm it up. Use a plastic flat tool for gentle removal of the emblem or nameplate. Use a 3M(TM) P/N 07501 molding adhesive remover disk for body panels or a lint-free cloth with VMP naphtha and 50/50 isopropyl alcohol for plastic panels to get rid of adhesives. Wipe the installation space with the cleaned cloth and solution until it becomes entirely dry. Apply tape over the installation area and label it when no markings exist. The J 25070 (Heat Gun) should raise mounting surface temperature to 27-41 degrees Celsius (80-105 degrees Fahrenheit). Press the emblem or nameplate into position at between 85 and 90 degrees Fahrenheit once the adhesive backing reaches 85 to 90 degrees Fahrenheit. Put the nameplate or emblem onto the designated spot by matching the marks before pressing it hard onto the surface and apply uniform pressure across the whole bond area. After that, take away the protective tape from the area where you want to install the badge.