Make sure this part fits

GM 25767582
Emblem

2003-2011 GM

Customer Questions & Expert Answers (11)
GM 25767582 Emblem
GM 25767582 Emblem
  • Part Description
    Emblem, High Mount Stop Lamp
  • Replaces
    25739126
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25767582 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25767582 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after positioning the emblem/nameplate for the 2007 Cadillac CTS? Posted by Customer
    A:
    Apply equal pressure along the emblem/nameplate to ensure a uniform bond, inspect for proper adhesion, hand roll any loose ends, and finally, remove the tape from the mounting surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be avoided when handling the emblem/nameplate for the 2010 Cadillac STS? Posted by Customer
    A:
    Avoid touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the installation area be prepared for the 2004 Cadillac CTS? Posted by Customer
    A:
    Ensure it is clean and dry, and if not previously marked, apply tape using the dimensions of 24 mm (0.94 in) from the horizontal edge and 209 mm (8.23 in) from the vertical edge of the rear compartment lid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the loose emblem be removed for the 2003 Cadillac CTS? Posted by Customer
    A:
    Carefully remove either the loose wreath or crest from the grille, ensuring not to damage the painted surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What precautions should be taken when handling the adhesive tape for the 2007 Cadillac CTS? Posted by Customer
    A:
    Avoid touching the tape with your hands or allowing it to contact dirt or foreign matter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be used for adhesive removal for the 2007 Cadillac STS? Posted by Customer
    A:
    Use a 3M(TM) Scotch Brite molding adhesive remover disk for body panels, or a lint-free cloth with Varnish Makers and Painters (VMP) naphtha or a 50/50 mixture of isopropyl alcohol and water for plastic panels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be used to wipe the area before installation for the 2004 Cadillac CTS? Posted by Customer
    A:
    A clean lint-free cloth with a 50/50 mixture of isopropyl alcohol and water.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the installation area be prepared for the 2009 Cadillac STS? Posted by Customer
    A:
    Clean the area with a lint-free cloth and the same cleaning solution, then dry thoroughly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the emblem or nameplate be heated for the 2008 Cadillac STS? Posted by Customer
    A:
    Use a J 25070 (Heat Gun) in a circular motion for about 30 seconds, holding it approximately 152 mm (6 in) from the surface.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace an emblem or nameplate for the 2005 Cadillac STS? Posted by Customer
    A:
    Protect the mounting surface with tape and use tape for alignment marks during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Emblem 25767582 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25767582 Emblem is available in the market under the name GM Emblem. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25767582 Emblem fits certain Cadillac CTS, STS models.
The original GM component designated by manufacturer part number 25767582 maintains top performance when functioning as the Emblem, High Mount Stop Lamp unit. The component 25767582 is constructed from durable material and its dimensions span 2.4 x 1.8 x 0.4 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Emblem, Tail Lamp. The part 25767582 has available replacement options 25739126. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.