OEM 2008 Cadillac XLR Door Striker

2008 Cadillac XLR Door Striker Parts Questions & Experts Answers

• Q: How to replace the front door striker on 2008 Cadillac XLR?

  A: You should begin front Door Striker replacement by lifting the door window then taking out the door panel. Proceed by removing the large water deflector until you can reach behind the door to mark the striker position on the door edge. Gather the striker fasteners inside the door and proceed to remove the striker. Insert the striker on the door with its latching pin pointed at the door latch before securing the fasteners tightly into position on the striker. Check that the striker lines up with earlier mounted points before fastening the screws to 25 n.m (18 lb ft). You should tighten the striker fasteners to 25 n.m (18 lb ft) from inside the door if an assistant holds the outer door panel steady against the quarter panel. The large water deflector and the door panel should be reinstalled while checking to ensure proper panel fit and testing for door latch functionality with manual and electric door release methods.