What Tools and Steps Are Required to Service and Repair the Coolant Pipe for Replacing the Radiator Surge Tank Inlet on 2008 Chevrolet Cobalt?

For servicing and repairing the Coolant Reservoir, in particular, to replace the surge tank inlet hose/pipe of the radiator, the following tool will be needed: hose clamp pliers (J 38185). Start with the removal of the surge tank cap while exercising care since the coolant temperature inside the radiator may be higher than the boiling point at atmospheric pressure hence it can be explosive boiling which may cause severe burns. Next, move the surge tank inlet hose clamp with the help of the hose clamp pliers (J 38185) and take the surge tank inlet hose from the surge tank. Disconnect the surge tank inlet hose from the underhood junction block bracket, then remove the air cleaner outlet resonator. Unclip the surge tank inlet hose from the Fuel Rail and again using the hose clamp pliers (J 38185) before repositioning the hose clamp on the hose under the hose before taking it away from the engine. For installation, first install surge tank inlet hose to the engine, and secure using the repositioned hose clamp with the help of the hose clamp pliers (J 38185). Cut the surge tank inlet hose onto the Fuel Rail, then install the air cleaner outlet resonator along with clipping the surge tank inlet hose onto the underhood junction block bracket. Lastly, connect the surge tank inlet hose to the surge tank and fix it using the hose clamp pliers (J 38185), and fill the cooling system if necessary.

OEM 2008 Chevrolet Cobalt Coolant Pipe

Engine Cooler Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Coolant Pipes found

View related parts
2008 Chevrolet Cobalt Inlet Hose Part Number: 15945886
$49.32 MSRP: $73.40
You Save: $24.08 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Radiator Surge Tank Air Bleed; Radiator Hose; Hose, Engine Coolant Recovery
- Replaces: 15222129, 15288393, 15945887
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.0 x 35.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15945886
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Cobalt Coolant Line Part Number: 12625357
$124.30 MSRP: $195.58
You Save: $71.28 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coolant Pipe; Cooling Pipe; Pipe, Turbocharger/Supercharger Air/Vacuum/Cooling
- Replaces: 12618970
- Item Weight: 0.90 Pounds
- Item Dimensions: 18.7 x 9.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12625357
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2008 Chevrolet Cobalt Cooling Pipe Part Number: 12618973
$91.94 MSRP: $144.01
You Save: $52.07 (37%)
Product Specifications
- Other Name: Pipe, Turbocharger/Supercharger Air/Vacuum/Cooling; Turbocharger Oil Line; Coolant Pipe; Oil Line; Return Line; Return Pipe
- Replaces: 12612070, 12608124
- Item Weight: 1.00 Pounds
- Item Dimensions: 13.8 x 8.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12618973
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2008 Chevrolet Cobalt Inlet Hose Part Number: 20758761
Product Specifications
- Other Name: Hose Assembly-Radiator Surge Tank Air Bleed; Radiator Hose; Hose, Engine Coolant Recovery
- Item Weight: 0.50 Pounds
- Item Dimensions: 30.9 x 9.2 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20758761
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2008 Chevrolet Cobalt Outlet Hose Part Number: 25940782
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Radiator Hose
- Replaces: 15925390
- Item Weight: 0.60 Pounds
- Item Dimensions: 15.5 x 3.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25940782
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Base, LS, LT | 4 Cyl 2.2 L GAS
View related parts
2008 Chevrolet Cobalt Outlet Hose Part Number: 25793832
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Radiator Hose
- Position: Upper
- Item Weight: 16.20 Pounds
- Item Dimensions: 18.6 x 17.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25793832
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Cobalt Connector Hose Part Number: 25979837
Product Specifications
- Other Name: Hose-Radiator Surge Tank Outlet Intermediate; Hose, Engine Coolant Recovery
- Replaces: 25793831
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.5 x 1.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25979837
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Cobalt Elbow Part Number: 25793833
Product Specifications
- Other Name: Hose, Engine Coolant Recovery
- Position: Lower
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.5 x 2.2 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25793833
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2008 Chevrolet Cobalt Upper Hose Part Number: 22709850
Product Specifications
- Other Name: Hose, Radiator Inlet (Upper); Multi Purpose Hose; Radiator Hose; Cooling Hose
- Position: Upper
- Item Weight: 1.20 Pounds
- Item Dimensions: 13.0 x 9.9 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22709850
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2008 Chevrolet Cobalt Coolant Pipe

With a comprehensive array of OEM 2008 Chevrolet Cobalt Coolant Pipe, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Cobalt Coolant Pipe are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Cobalt Coolant Pipe Parts and Q&A

Q: What Tools and Steps Are Required to Service and Repair the Coolant Pipe for Replacing the Radiator Surge Tank Inlet on 2008 Chevrolet Cobalt?
A: For servicing and repairing the Coolant Reservoir, in particular, to replace the surge tank inlet hose/pipe of the radiator, the following tool will be needed: hose clamp pliers (J 38185). Start with the removal of the surge tank cap while exercising care since the coolant temperature inside the radiator may be higher than the boiling point at atmospheric pressure hence it can be explosive boiling which may cause severe burns. Next, move the surge tank inlet hose clamp with the help of the hose clamp pliers (J 38185) and take the surge tank inlet hose from the surge tank. Disconnect the surge tank inlet hose from the underhood junction block bracket, then remove the air cleaner outlet resonator. Unclip the surge tank inlet hose from the Fuel Rail and again using the hose clamp pliers (J 38185) before repositioning the hose clamp on the hose under the hose before taking it away from the engine. For installation, first install surge tank inlet hose to the engine, and secure using the repositioned hose clamp with the help of the hose clamp pliers (J 38185). Cut the surge tank inlet hose onto the Fuel Rail, then install the air cleaner outlet resonator along with clipping the surge tank inlet hose onto the underhood junction block bracket. Lastly, connect the surge tank inlet hose to the surge tank and fix it using the hose clamp pliers (J 38185), and fill the cooling system if necessary.