How to replace the Blend Door Actuator on 2008 Chevrolet HHR?

To replace the air-temperature actuator, one should begin by removing the Fuse labeled hvac ctrl (BATT) and knee bolster reinforcement. Next, remove the instrument panel (I/P) tie bar. Depress the air temperature actuator electrical connector. Remove the screws that are holding the air temperature actuator in the place and after that take out the actuator itself. And for installation, make sure the key is off when you're working with the electrical connectors to ensure proper calibration. Mount the air temperature actuator and then screws with the torque of 2.2 n.m (19 lb in). Reconnect the electrical connector of the actuator to measure the air temperature and reinstall the tie bar for the i/p and the reinforcement for the knee bolster. Finally, change the Fuse marked hvac ctrl (BATT). Don't tamper with any controls on the hvac control assembly so as to prevent the wrong performance of hvac and start the engine allowing it to run for a minute.

OEM 2008 Chevrolet HHR Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

View related parts
2008 Chevrolet HHR Actuator Part Number: 10393075
$37.02 MSRP: $109.57
You Save: $72.55 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Actuator, A/C Control
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.3 x 4.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10393075
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet HHR Actuator Part Number: 15842338
$63.01 MSRP: $129.48
You Save: $66.47 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Actuator, A/C Control
- Replaces: 52494371
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.0 x 3.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15842338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2008 Chevrolet HHR Blend Door Actuator

With a comprehensive array of OEM 2008 Chevrolet HHR Blend Door Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet HHR Blend Door Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet HHR Blend Door Actuator Parts and Q&A

Q: How to replace the Blend Door Actuator on 2008 Chevrolet HHR?
A: To replace the air-temperature actuator, one should begin by removing the Fuse labeled hvac ctrl (BATT) and knee bolster reinforcement. Next, remove the instrument panel (I/P) tie bar. Depress the air temperature actuator electrical connector. Remove the screws that are holding the air temperature actuator in the place and after that take out the actuator itself. And for installation, make sure the key is off when you're working with the electrical connectors to ensure proper calibration. Mount the air temperature actuator and then screws with the torque of 2.2 n.m (19 lb in). Reconnect the electrical connector of the actuator to measure the air temperature and reinstall the tie bar for the i/p and the reinforcement for the knee bolster. Finally, change the Fuse marked hvac ctrl (BATT). Don't tamper with any controls on the hvac control assembly so as to prevent the wrong performance of hvac and start the engine allowing it to run for a minute.