OEM Chevrolet HHR Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

  • Chevy HHR Blend Door Actuator - 10393075
    Chevy HHR Blend Door Actuator Diagram - 10393075
    View related parts

    Chevrolet HHR Actuator

    Part Number: 10393075
    $37.02 MSRP: $109.57
    You Save: $72.55 (67%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Actuator, A/C Control
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
  • Chevy HHR Blend Door Actuator - 15842338
    Chevy HHR Blend Door Actuator Diagram - 15842338
    View related parts

    Chevrolet HHR Actuator

    Part Number: 15842338
    $61.77 MSRP: $126.94
    You Save: $65.17 (52%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Actuator, A/C Control
    • Replaces: 52494371
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

Chevrolet HHR Blend Door Actuator

Our website offers an extensive catalog of genuine Chevrolet HHR Blend Door Actuator at unbeatable prices. Every OEM Chevrolet HHR Blend Door Actuator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet HHR Blend Door Actuator Parts Questions & Experts Answers

  • Q: How to replace the Blend Door Actuator on Chevrolet HHR?
    A: To replace the air-temperature actuator, one should begin by removing the Fuse labeled hvac ctrl (BATT) and knee bolster reinforcement. Next, remove the instrument panel (I/P) tie bar. Depress the air temperature actuator electrical connector. Remove the screws that are holding the air temperature actuator in the place and after that take out the actuator itself. And for installation, make sure the key is off when you're working with the electrical connectors to ensure proper calibration. Mount the air temperature actuator and then screws with the torque of 2.2 n.m (19 lb in). Reconnect the electrical connector of the actuator to measure the air temperature and reinstall the tie bar for the i/p and the reinforcement for the knee bolster. Finally, change the Fuse marked hvac ctrl (BATT). Don't tamper with any controls on the hvac control assembly so as to prevent the wrong performance of hvac and start the engine allowing it to run for a minute.

Related Chevrolet HHR Parts