How to replace the Blend Door Actuator on 2009 Chevrolet HHR?

First disconnect the fuse named HVAC CTRL (BATT) and knee bolster reinforcement. Then, remove the instrument panel tie bar and remove the air temperature actuator electrical connector. Take out the screws that are fixed to the air temperature actuator, and then remove the actuator. In installation, make sure that the key is in the OFF mode when joining the electrical connectors to ensure that it is calibrated correctly. Mount the air temperature actuator followed with screw fastening to 2.2 Nm (19 lb in). Reconnect the air temperature actuator electrical connector; install the I/P tie bar, as well as the knee bolster reinforcement. Finally, install the fuse served with a label of HVAC CTRL (BATT). Do not interfere with any controls on the HVAC control assembly during calibration to prevent incorrect hvac performance and, turn the engine starting it to run for a minute.

OEM 2009 Chevrolet HHR Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Blend Door Actuators found

View related parts
2009 Chevrolet HHR Actuator
Part Number: 10393075
$37.02 MSRP: $109.57
You Save: $72.55 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Actuator, A/C Control
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.3 x 4.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10393075
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet HHR Actuator
Part Number: 15842338
$61.77 MSRP: $126.94
You Save: $65.17 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; Actuator, A/C Control
- Replaces: 52494371
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.0 x 3.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15842338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2009 Chevrolet HHR Blend Door Actuator

With a comprehensive array of OEM 2009 Chevrolet HHR Blend Door Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet HHR Blend Door Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the Blend Door Actuator on 2009 Chevrolet HHR?
A: First disconnect the fuse named HVAC CTRL (BATT) and knee bolster reinforcement. Then, remove the instrument panel tie bar and remove the air temperature actuator electrical connector. Take out the screws that are fixed to the air temperature actuator, and then remove the actuator. In installation, make sure that the key is in the OFF mode when joining the electrical connectors to ensure that it is calibrated correctly. Mount the air temperature actuator followed with screw fastening to 2.2 Nm (19 lb in). Reconnect the air temperature actuator electrical connector; install the I/P tie bar, as well as the knee bolster reinforcement. Finally, install the fuse served with a label of HVAC CTRL (BATT). Do not interfere with any controls on the HVAC control assembly during calibration to prevent incorrect hvac performance and, turn the engine starting it to run for a minute.