OEM 2008 Chevrolet HHR Brake Shoe

2008 Chevrolet HHR Parts Questions & Experts Answers

• Q: How to replace the brake shoes on 2008 Chevrolet HHR?

  A: A vehicle should first be lifted and supported to replace brake shoes. Start by detaching the tire-wheel set after Brake Drum removal. Avoid extending the adjuster spring beyond its designed limits when performing the operation. Start with adjuster spring removal before disconnecting it from the adjuster actuator lever and then separate the adjuster actuator lever from its pivot. The Brake Shoe spanner and spring remover tool with j 38400 identification (J 38400) allows users to spread brake shoes open to remove the adjuster assembly from its position between shoes. Insert the hook of the Brake Shoe spanner and spring remover (J 38400) under the universal spring then eliminate the trailing Brake Shoe before you can free the park brake cable from the trailing shoe's park brake lever. The same method should be applied to remove the leading Brake Shoe. The Brake Shoe lining needs replacement when readings show equal to or less than 0.5 mm (0.020 in) thickness. Conduct an application of high-temperature silicone brake lubricant to the Brake Shoe contact surfaces located on the Brake Backing Plate using a thin coat. Insert the leading Brake Shoe through engagement of the universal spring while the trailing Brake Shoe must follow with proper universal spring engagement. The Brake Shoe spanner j 38400 allows maintenance personnel to spread brake shoes apart before adding the adjuster assembly while properly installing the adjuster actuator lever. Safely attach the adjuster spring by letting its loop side completely contact the actuator lever tab. The last step includes Brake Drum adjustment before adding the Brake Drum and tire and wheel assembly followed by lowering the vehicle.