Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
Other Name: Mount Assembly-Transmission *Orange; Transfer Case Mount; Mount, Transmission Mounting
Replaces: 22178939, 22173073
Item Weight: 2.30 Pounds
Item Dimensions: 7.1 x 6.4 x 4.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 22146834
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
Other Name: Mount, Transmission Mounting; Transfer Case Mount
Item Weight: 2.30 Pounds
Item Dimensions: 7.1 x 6.2 x 4.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 10348602
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
SS | 8 Cyl 5.3 L GAS
2008 Chevrolet Impala Motor And Transmission Mount
With a comprehensive array of OEM 2008 Chevrolet Impala Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Impala Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 Chevrolet Impala Parts Questions & Experts Answers
Q: How to replace the LH Motor and Transmission Mount on 2008 Chevrolet Impala?
A: To eliminate the left side transmission mount, primary, raise and support the motor vehicle, next, eliminate the left motor vehicle tire and heap it, followed by the left engine splash shield. Place a transmission jack under the transaxle and loosen the transaxle bracket (NPN 123456) with the transaxle mount upper nuts. Carefully lift the transaxle assembly, after which it will be necessary to remove the transaxle mount lower nuts (NPN 654321) from the frame and remove the transaxle mount. For installation, the position of the transaxle mount disposed to the frame, then the transaxle mount lower nuts tightened to 63 n.m (46 lb ft). Lower the transaxle and place the studs of the transaxle mount into the transaxle bracket then tighten the screws of the upper nuts to the value of 47 n.m (35 lb ft). Take out the transmission jack, reattach the left engine splash shield, replace the left wheel and tire assembly and ultimately lower the vehicle.