OEM 2008 Chevrolet Uplander Blower Motor

2008 Chevrolet Uplander Parts Questions & Experts Answers

• Q: How to replace the Auxiliary Blower Motor (E59) on 2008 Chevrolet Uplander?

  A: The first step to replace the Auxiliary Blower Motor (E59) involves removing the left lower quarter trim panel. Sliding to dispose of the power door actuator and its bracket. Beginning the procedure requires a disconnection of the auxiliary blower motor electrical connector and auxiliary blower motor resistor electrical connector. Rotating pairs of lower auxiliary air distribution duct bolts while removing their retainer screws will let you detach the duct completely. All steps for replacing the auxiliary blower motor require complete removal of the blower motor housing from installation. Start by disassembling the auxiliary blower motor housing screws before raising it upward to detach it from the HVAC module assembly. The installation process starts with removing auxiliary blower motor mounting screws followed by taking out the auxiliary blower motor from the blower motor housing. Install the auxiliary blower motor to the blower motor housing starting with the Fastener Notice. Attach the blower motor housing to the auxiliary HVAC module assembly while ensuring proper rear tab alignment and secure its mounting screws to 1.6 N.m (14 lb in). Attach the auxiliary blower motor housing screws while tightening them to 1.6 N.m (14 lb in). After replacing the lower auxiliary air distribution duct, install its retainers and bolts before tightening them to 10 N.m (89 lb in). Reinstall the left lower quarter trim panel afterward you reconnect both the auxiliary blower motor resistor electrical connector and the auxiliary blower motor electrical connector.