How to replace the front brake caliper bracket on 2009 Chevrolet Malibu?

To replace the front Brake Caliper Bracket, first, stabilise the brake caliper using heavy mechanic's wire without the need to remove the hydraulic brake flexible hose. The brake pads and Brake Pad retainers, followed by the brake caliper, should be removed from the mounting bracket. In case of reusing the bracket, clean the pad hardware mating surfaces thoroughly. Check the disc Brake Pad retainers for bent mount attachment, overcorrosive mounts, or looseness; replace in case there are any issues. Then, take off the brake caliper mounting bracket bolts and disconnect the bracket from the Steering Knuckle. Examine the caliper bracket for bends, cracks and damage, and the brake caliper guide pins for movement and the wear of the guide pin boots . If there are any restrictions or damage, replace guide pin s or boots. To install the brake caliper mounting bracket should be attached to the steering knuckles and fix in place with mounting bracket bolts, snug to 130 nm (96 lb ft) but after can utilize a slim coating of high-temperature silicone brake lubricant to the pad matering surface. Clean the Brake Pad mating surfaces on the side Brake Pad retainers and mount them onto the Brake Caliper Bracket. Position the wear sensor-equipped disc Brake Pad correctly relative to the rotor. Lastly, install the brake pads, remove support and reposition the brake caliper over the brake pads and bracket of mounting.

OEM 2009 Chevrolet Malibu Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Caliper Brackets found

View related parts
2009 Chevrolet Malibu Support Bracket, Front
Part Number: 22705377
$73.90 MSRP: $115.75
You Save: $41.85 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Mount; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Item Weight: 3.90 Pounds
- Item Dimensions: 11.7 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22705377
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2009 Chevrolet Malibu Support Bracket, Front
Part Number: 22705376
$70.96 MSRP: $124.50
You Save: $53.54 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Caliper Mount; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.2 x 3.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22705376
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2009 Chevrolet Malibu Caliper Support, Passenger Side
Part Number: 22705360
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Passenger Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.2 x 4.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22705360
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2009 Chevrolet Malibu Caliper Support, Driver Side
Part Number: 22705359
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Driver Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.2 x 4.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22705359
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS

2009 Chevrolet Malibu Brake Caliper Bracket

With a comprehensive array of OEM 2009 Chevrolet Malibu Brake Caliper Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Malibu Brake Caliper Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the front brake caliper bracket on 2009 Chevrolet Malibu?
A: To replace the front Brake Caliper Bracket, first, stabilise the brake caliper using heavy mechanic's wire without the need to remove the hydraulic brake flexible hose. The brake pads and Brake Pad retainers, followed by the brake caliper, should be removed from the mounting bracket. In case of reusing the bracket, clean the pad hardware mating surfaces thoroughly. Check the disc Brake Pad retainers for bent mount attachment, overcorrosive mounts, or looseness; replace in case there are any issues. Then, take off the brake caliper mounting bracket bolts and disconnect the bracket from the Steering Knuckle. Examine the caliper bracket for bends, cracks and damage, and the brake caliper guide pins for movement and the wear of the guide pin boots . If there are any restrictions or damage, replace guide pin s or boots. To install the brake caliper mounting bracket should be attached to the steering knuckles and fix in place with mounting bracket bolts, snug to 130 nm (96 lb ft) but after can utilize a slim coating of high-temperature silicone brake lubricant to the pad matering surface. Clean the Brake Pad mating surfaces on the side Brake Pad retainers and mount them onto the Brake Caliper Bracket. Position the wear sensor-equipped disc Brake Pad correctly relative to the rotor. Lastly, install the brake pads, remove support and reposition the brake caliper over the brake pads and bracket of mounting.