How to replace the Brake Fluid Level Sensor for 2.4L Non-Hybrid and 3.6L engines on 2009 Chevrolet Malibu?

Replace the Brake Fluid Indicator Level (without RPO LAT) switch for 2.4L nonhybrid and 3.6L engines by removing Brake fluid level indicator switch electrical connector while master cylinder reservoir has the brake fluid removed. Then have the turn off the gravity feed pumpware from the reservoir, next remove the master cylinder reservoir bolt and remove the reservoir from the master cylinder, then remove the fluid level indicator switch from the master cylinder by pressing on the locking tabs on the switch from the bottom on the reservoir. For installation, clean the reservoir with denatured alcohol and dry it with a filtered, non-lubricated compressed air. Mount the fluid level indicator switch on the master cylinder with the locking tabs in place and then replace the reservoir onto the master cylinder. Replace the master cylinder reservoir bolt and tighten to 8 Nm (71 lb in), reconnect brake fluid indicator switch electric connection, have reservoir filled for master cylinder.

OEM 2009 Chevrolet Malibu Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Fluid Level Sensors found

View related parts
2009 Chevrolet Malibu Level Sensor
Part Number: 18012741
$12.95 MSRP: $25.15
You Save: $12.20 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2009 Chevrolet Malibu Level Sensor
Part Number: 22729486
Product Specifications
- Other Name: Switch, Brake Fluid Level Indicator; Level Indicator; Fluid Level Sensor; Fluid Level Switch; Switch, Brake Master Cylinder Reservoir
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.1 x 2.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22729486
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2009 Chevrolet Malibu Brake Fluid Level Sensor

With a comprehensive array of OEM 2009 Chevrolet Malibu Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Malibu Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the Brake Fluid Level Sensor for 2.4L Non-Hybrid and 3.6L engines on 2009 Chevrolet Malibu?
A: Replace the Brake Fluid Indicator Level (without RPO LAT) switch for 2.4L nonhybrid and 3.6L engines by removing Brake fluid level indicator switch electrical connector while master cylinder reservoir has the brake fluid removed. Then have the turn off the gravity feed pumpware from the reservoir, next remove the master cylinder reservoir bolt and remove the reservoir from the master cylinder, then remove the fluid level indicator switch from the master cylinder by pressing on the locking tabs on the switch from the bottom on the reservoir. For installation, clean the reservoir with denatured alcohol and dry it with a filtered, non-lubricated compressed air. Mount the fluid level indicator switch on the master cylinder with the locking tabs in place and then replace the reservoir onto the master cylinder. Replace the master cylinder reservoir bolt and tighten to 8 Nm (71 lb in), reconnect brake fluid indicator switch electric connection, have reservoir filled for master cylinder.