How to replace the brake fluid level sensor on Chevrolet Malibu?

You should first remove the Brake Master Cylinder mounting nuts from the booster to position the master cylinder while maintaining access to the Brake Fluid Level Sensor without disrupting brake lines. Pull off the Brake Fluid Level Sensor electrical connector then push down the sensor retaining tabs with pliers to extract it from the master cylinder. Place the Brake Fluid Level Sensor in its position under the master cylinder reservoir and push until the retaining tabs snap into place. Connect the electrical parts to the sensor making sure both the cylinder gasket and the barrel gasket face the empty fluid reservoir and show no damage due to cuts. Reposition the Brake Master Cylinder onto the booster assembly at last.

OEM Chevrolet Malibu Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Fluid Level Sensors found

View related parts
Chevrolet Malibu Level Sensor
Part Number: 18012741
$12.95 MSRP: $25.15
You Save: $12.20 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2010 Chevrolet Malibu | Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Level Sensor
Part Number: 13286456
$79.85 MSRP: $153.10
You Save: $73.25 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Brake Master Cylinder Reservoir; Level Indicator; Fluid Level Sensor; Fluid Level Switch; Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Level Sensor
Part Number: 23499362
$13.43 MSRP: $21.02
You Save: $7.59 (37%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Pressure Warning; Level Indicator; Fluid Level Sensor; Fluid Level Switch; Switch, Brake Master Cylinder Reservoir
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 Chevrolet Malibu | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Level Sensor
Part Number: 22729486
Product Specifications
- Other Name: Switch, Brake Fluid Level Indicator; Level Indicator; Fluid Level Sensor; Fluid Level Switch; Switch, Brake Master Cylinder Reservoir
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

Chevrolet Malibu Brake Fluid Level Sensor

Our website offers an extensive catalog of genuine Chevrolet Malibu Brake Fluid Level Sensor at unbeatable prices. Every OEM Chevrolet Malibu Brake Fluid Level Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Malibu Brake Fluid Level Sensor Parts Questions & Experts Answers

Level Sensor
18012741
Q: How to replace the brake fluid level sensor on Chevrolet Malibu?
A: You should first remove the Brake Master Cylinder mounting nuts from the booster to position the master cylinder while maintaining access to the Brake Fluid Level Sensor without disrupting Brake Lines. Pull off the Brake Fluid Level Sensor electrical connector then push down the sensor retaining tabs with pliers to extract it from the master cylinder. Place the Brake Fluid Level Sensor in its position under the master cylinder reservoir and push until the retaining tabs snap into place. Connect the electrical parts to the sensor making sure both the cylinder gasket and the barrel gasket face the empty fluid reservoir and show no damage due to cuts. Reposition the Brake Master Cylinder onto the booster assembly at last.