How to replace the brake fluid level sensor on 2007 Chevrolet Malibu?

You should first remove the Brake Master Cylinder mounting nuts from the booster to position the master cylinder while maintaining access to the Brake Fluid Level Sensor without disrupting brake lines. Pull off the Brake Fluid Level Sensor electrical connector then push down the sensor retaining tabs with pliers to extract it from the master cylinder. Place the Brake Fluid Level Sensor in its position under the master cylinder reservoir and push until the retaining tabs snap into place. Connect the electrical parts to the sensor making sure both the cylinder gasket and the barrel gasket face the empty fluid reservoir and show no damage due to cuts. Reposition the Brake Master Cylinder onto the booster assembly at last.

OEM 2007 Chevrolet Malibu Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2007 Chevrolet Malibu Level Sensor Part Number: 18012741
$13.39 MSRP: $25.15
You Save: $11.76 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2007 Chevrolet Malibu Brake Fluid Level Sensor

With a comprehensive array of OEM 2007 Chevrolet Malibu Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Malibu Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Malibu Brake Fluid Level Sensor Parts and Q&A

Q: How to replace the brake fluid level sensor on 2007 Chevrolet Malibu?
A: You should first remove the Brake Master Cylinder mounting nuts from the booster to position the master cylinder while maintaining access to the Brake Fluid Level Sensor without disrupting brake lines. Pull off the Brake Fluid Level Sensor electrical connector then push down the sensor retaining tabs with pliers to extract it from the master cylinder. Place the Brake Fluid Level Sensor in its position under the master cylinder reservoir and push until the retaining tabs snap into place. Connect the electrical parts to the sensor making sure both the cylinder gasket and the barrel gasket face the empty fluid reservoir and show no damage due to cuts. Reposition the Brake Master Cylinder onto the booster assembly at last.