How to Properly Replace a Brake Proportioning Valve on Chevrolet Malibu?

To replace the proportioning valve, the first thing one must do is take off the 2 brake pipes out of the valve while using the bleeder valve cover to prevent breaks from draining out and protect it from contamination; label and mark of the brake pipes to facilitate the installation. After that, just remove the 4 brake pipes from the valve, using caps again to avoid losing any fluid. Take off the 2 proportioning valve bracket nuts and extract the proportioning valve assembly. For installation, replace the proportioning valve assembly with the back and use the 2 bracket nuts to tighten them up to 10 Nm (89 inch lbs). After plucking out the tape marking the positions of the braking pipes, make sure you have connected the braking pipe to the braking pressure modulator valve to prevent wear lockup as the only method to detect the wear lockup is through a Scan Tool or through a braking applied stop. Subsequently, remove the caps from 4 brake pipes and attach them to the proportioning valve tightening the fittings up to 20 Nm (15ft. lbs). Lastly, take off the caps of the 2 brake pipes and attach them to the proportioning valve and tighten them also to 20 Nm (15 ft. lbs.,) and bleed the brake system.

OEM Chevrolet Malibu Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Proportioning Valves found

View related parts
Chevrolet Malibu Pressure Valve
Part Number: 18029841
$72.89 MSRP: $131.36
You Save: $58.47 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Brake Master Cylinder Proportioning; Brake Proportioning Valve; ABS Control Module; Pressure Metering Valve
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Pressure Metering Valve
Part Number: 22701249
Product Specifications
- Other Name: Valve Assembly-Brake Proportioning; Brake Proportioning Valve; Valve, Brake Master Cylinder Proportioning
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Valve
Part Number: 15847196
Product Specifications
- Other Name: Valve-Brake Master Cylinder Proportioning; Valve, Brake Master Cylinder Proportioning
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Malibu | Base, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Pressure Metering Valve
Part Number: 15821482
Product Specifications
- Other Name: Valve-Brake Master Cylinder Proportioning; Brake Proportioning Valve; Valve; Valve, Brake Master Cylinder Proportioning
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004 Chevrolet Malibu | Base, LS, LT, Maxx, Maxx LS, Maxx LT | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chevrolet Malibu Pressure Valve
Part Number: 25818715
Product Specifications
- Other Name: Valve, Electronic Brake Control; ABS Control Module; Modulator Valve; Modulator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

Chevrolet Malibu Brake Proportioning Valve

Our website offers an extensive catalog of genuine Chevrolet Malibu Brake Proportioning Valve at unbeatable prices. Every OEM Chevrolet Malibu Brake Proportioning Valve comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Malibu Brake Proportioning Valve Parts Questions & Experts Answers

Valve
15847196
Q: How to Properly Replace a Brake Proportioning Valve on Chevrolet Malibu?
A: To replace the proportioning valve, the first thing one must do is take off the 2 brake pipes out of the valve while using the bleeder valve cover to prevent breaks from draining out and protect it from contamination; label and mark of the brake pipes to facilitate the installation. After that, just remove the 4 brake pipes from the valve, using caps again to avoid losing any fluid. Take off the 2 proportioning valve bracket nuts and extract the proportioning valve assembly. For installation, replace the proportioning valve assembly with the back and use the 2 bracket nuts to tighten them up to 10 Nm (89 inch lbs). After plucking out the tape marking the positions of the braking pipes, make sure you have connected the braking pipe to the braking pressure modulator valve to prevent wear lockup as the only method to detect the wear lockup is through a Scan Tool or through a braking applied stop. Subsequently, remove the caps from 4 brake pipes and attach them to the proportioning valve tightening the fittings up to 20 Nm (15ft. lbs). Lastly, take off the caps of the 2 brake pipes and attach them to the proportioning valve and tighten them also to 20 Nm (15 ft. lbs.,) and bleed the brake system.