How to replace the brake master cylinder (without RPO LAT) for 2.4L Non Hybrid and 3.6L engines on Chevrolet Malibu?

Replace the Brake Master Cylinder of 2.4l non hybrid and 3.6l engines by first removing and setting aside the radiator surge tank while keeping the cooling system intact. Dissipate vacuum from the Brake Booster by taking out the vacuum check valve that fits into the booster grommet. You should disconnect the master cylinder electrical connector plus remove the secondary brake pipe cap and the master cylinder outlet port plug to secure the brake fluid during replacement work. Follow this process to disconnect the primary brake pipe fitting at the master cylinder. Take out all nuts from the master cylinder then pull it off. Check the master cylinder seal around the vacuum booster for wear then replace if found faulty. Put the Brake Master Cylinder reservoir onto its designated position on the master cylinder unit. Put the master cylinder in the vacuum Brake Booster and check if the master cylinder to barrel contact sits correctly before installing it permanently. Install the master hydraulic cylinder nuts before tightening them to 25 nm (18 lb ft). Then connect and secure the primary brake line attaching fitting to 32 nm (24 lb ft) while doing the same for the secondary brake line. Connect the vacuum check valve to the Brake Booster grommet after lubricating it with a little denatured alcohol when needed. Put in the radiator surge tank and let air out of the hydraulic brake system.

OEM Chevrolet Malibu Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Brake Master Cylinders found

View related parts
Chevrolet Malibu Master Cylinder Assembly Part Number: 84008544
$666.99 MSRP: $1054.19
You Save: $387.20 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly-Brake Master (W/Power Brake Booster & Electronic Brake; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu Master Cylinder Part Number: 84118589
$217.93 MSRP: $342.83
You Save: $124.90 (37%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit, Brake Master Cylinder; Brake Master Cylinder
- Replaced by: 84834440
- Replaces: 23270766
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2019 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu Brake Booster Part Number: 84658875
$1015.42 MSRP: $1604.89
You Save: $589.47 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Master Cylinder Assembly; Brake Master Cylinder
- Replaces: 84089874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu Master Cylinder Part Number: 84927729
$67.89 MSRP: $186.62
You Save: $118.73 (64%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit, Brake Master Cylinder
- Replaces: 84038581, 84118574
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 Chevrolet Malibu | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Brake Booster Part Number: 84658877
$663.82 MSRP: $1196.08
You Save: $532.26 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder
- Replaces: 84237373
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu Brake Booster Part Number: 84402438
$659.04 MSRP: $1237.63
You Save: $578.59 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Master Cylinder Assembly; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu Master Cylinder Part Number: 25952633
$223.64 MSRP: $437.85
You Save: $214.21 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Master Cylinder Part Number: 18060787
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18045119
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Malibu | Base, LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Master Cylinder Part Number: 15221998
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Malibu | Hybrid, Maxx SS, SS | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Master Cylinder Part Number: 25872283
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Clutch Master Cylinder; Brake Master Cylinder
- Replaces: 25783873
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Malibu | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Master Cylinder Part Number: 19209272
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 22675995
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Malibu | Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chevrolet Malibu Master Cylinder Part Number: 18029862
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Brake Booster Part Number: 84658873
$772.16 MSRP: $1220.42
You Save: $448.26 (37%)
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder
- Replaces: 84089872
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu Master Cylinder Part Number: 84073180
$119.35 MSRP: $214.08
You Save: $94.73 (45%)
Product Specifications
- Other Name: Cylinder Kit, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 13286445, 22908217
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS

Chevrolet Malibu Brake Master Cylinder

Want to cut long-term maintenance and repair costs? Choose OEM Brake Master Cylinder. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Malibu parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Malibu Brake Master Cylinder includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Brake Master Cylinder present in all cars including Chevrolet Malibu is a very important part of braking mechanism as it is responsible to turn the pressure applied by the driver's foot into hydraulic pressure to control the brake of the car. It works by pumping the hydraulic fluid through the system in order to actuate the calipers or the drum brakes resulting in the generation of required amount of friction to bring the vehicle to a halt. Chevrolet Malibu usually incorporates a dual circuit master cylinder kind which makes it possible for a car to be braked even if one circuit fails to work. Chevrolet Malibu cars of different years used the cast iron and aluminum master cylinder, more or less different reservoir can be integral or external type. Integral reservoirs are usually capped by one collar while external ones are usually capped by one or two threaded collars. In any type, the Brake Master Cylinder is considered as the primary element for effective vehicle braking, and every reserved issue which is related to lection or inner part failures, will lead to severe braking problem that must be treated immediately.

Chevrolet Malibu Brake Master Cylinder Parts Questions & Experts Answers

Master Cylinder
25952633
Q: How to replace the brake master cylinder (without RPO LAT) for 2.4L Non Hybrid and 3.6L engines on Chevrolet Malibu?
A:
Replace the Brake Master Cylinder of 2.4l non hybrid and 3.6l engines by first removing and setting aside the radiator surge tank while keeping the cooling system intact. Dissipate vacuum from the Brake Booster by taking out the vacuum check valve that fits into the booster grommet. You should disconnect the master cylinder electrical connector plus remove the secondary brake pipe cap and the master cylinder outlet port plug to secure the brake fluid during replacement work. Follow this process to disconnect the primary brake pipe fitting at the master cylinder. Take out all nuts from the master cylinder then pull it off. Check the master cylinder seal around the vacuum booster for wear then replace if found faulty. Put the Brake Master Cylinder reservoir onto its designated position on the master cylinder unit. Put the master cylinder in the vacuum Brake Booster and check if the master cylinder to barrel contact sits correctly before installing it permanently. Install the master hydraulic cylinder nuts before tightening them to 25 nm (18 lb ft). Then connect and secure the primary brake line attaching fitting to 32 nm (24 lb ft) while doing the same for the secondary brake line. Connect the vacuum check valve to the Brake Booster grommet after lubricating it with a little denatured alcohol when needed. Put in the radiator surge tank and let air out of the hydraulic brake system.