How to replace the blower motor on 2010 Chevrolet Corvette?

Start the Blower Motor replacement procedure by taking off the right-hand (RH) insulator panel. Take off the Blower Motor power before you start work as the hand may start the fan when touched and hurt you. The Blower Motor Resistor works as part of the Blower Motor assembly which makes it impossible to service separately. Before proceeding disconnect the Blower Motor's electrical connector then unscrew its retaining screws to remove the Blower Motor from the hvac module. Install the new Blower Motor unit into the hvac module by aligning the equipment with standard fastener practices. The Blower Motor needs fastening with retaining screws before being equipped with an electrical connector and the rh insulator panel.

OEM 2010 Chevrolet Corvette Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
2010 Chevrolet Corvette Blower Motor
Part Number: 23456469
$244.82 MSRP: $503.09
You Save: $258.27 (52%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Blower; HVAC Blower Motor; Blower Assembly; Motor, A/C Evaporator Blower; Motor, Heater Blower Motor
- Replaces: 22992235, 89018255, 89018845
- Item Weight: 3.10 Pounds
- Item Dimensions: 13.8 x 12.5 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23456469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Stingray, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Blower Motor

With a comprehensive array of OEM 2010 Chevrolet Corvette Blower Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Blower Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to replace the blower motor on 2010 Chevrolet Corvette?
A: Start the Blower Motor replacement procedure by taking off the right-hand (RH) insulator panel. Take off the Blower Motor power before you start work as the hand may start the fan when touched and hurt you. The Blower Motor Resistor works as part of the Blower Motor assembly which makes it impossible to service separately. Before proceeding disconnect the Blower Motor's electrical connector then unscrew its retaining screws to remove the Blower Motor from the hvac module. Install the new Blower Motor unit into the hvac module by aligning the equipment with standard fastener practices. The Blower Motor needs fastening with retaining screws before being equipped with an electrical connector and the rh insulator panel.

Related 2010 Chevrolet Corvette Parts

Alternate Year Models

2009 Chevrolet Corvette Blower Motor 2011 Chevrolet Corvette Blower Motor