How to replace the rear wheel cylinder on 2010 Chevrolet HHR?

Before installing the new brake cylinder start by taking out the Brake Drum and cleaning the areas around the Wheel Cylinder of dirt. Twist off the Wheel Cylinder brake pipe fitting and use a cap to seal it from fluid loss while protecting it from dust. Detach the Wheel Cylinder bolts then open the brake shoes slightly to unlatch the Wheel Cylinder from its position. Open the brake shoes by spreading them from top to bottom and place the new Wheel Cylinder over them. Use a torque wrench to lock the cylinder bolts at 8 nm (71 lb in). Attach and fasten the pipe connection to the Wheel Cylinder using 19 nm (14 lb ft) torque. Test hydraulic brakes after putting in the Brake Drum to make sure the drum brakes work properly.

OEM 2010 Chevrolet HHR Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Cylinders found

View related parts
2010 Chevrolet HHR Brake Shoes
Part Number: 25994649
Product Specifications
- Other Name: Cylinder, Wheel Brake Cylinder/Caliper; Wheel Cylinder
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.1 x 5.3 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25994649
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.4 L FLEX
View related parts
2010 Chevrolet HHR Wheel Cylinder
Part Number: 25994648
Product Specifications
- Other Name: Cylinder, Wheel Brake Cylinder/Caliper; Wheel Cylinder Repair Kit
- Position: Rear
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.1 x 6.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25994648
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.4 L FLEX

2010 Chevrolet HHR Wheel Cylinder

With a comprehensive array of OEM 2010 Chevrolet HHR Wheel Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Wheel Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the rear wheel cylinder on 2010 Chevrolet HHR?
A: Before installing the new brake cylinder start by taking out the Brake Drum and cleaning the areas around the Wheel Cylinder of dirt. Twist off the Wheel Cylinder brake pipe fitting and use a cap to seal it from fluid loss while protecting it from dust. Detach the Wheel Cylinder bolts then open the brake shoes slightly to unlatch the Wheel Cylinder from its position. Open the brake shoes by spreading them from top to bottom and place the new Wheel Cylinder over them. Use a torque wrench to lock the cylinder bolts at 8 nm (71 lb in). Attach and fasten the pipe connection to the Wheel Cylinder using 19 nm (14 lb ft) torque. Test hydraulic brakes after putting in the Brake Drum to make sure the drum brakes work properly.