Make sure this part fits

GM 25994649
Brake Shoes

2009-2010 GM

Customer Questions & Expert Answers (5)
GM 25994649 Brake Shoes
  • Part Description
    Cylinder, Wheel Brake Cylinder/Caliper
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2010 Chevrolet CobaltBase, LS, LT, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
    2009-2010 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS, SS Panel4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.4 L FLEX
    2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25994649 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25994649 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wheel cylinder on Chevrolet Cobalt? Posted by Customer
    A:
    The procedure starts by raising the vehicle and supporting it while you remove the tire along with the wheel assembly and Brake Drum. Begin by cleaning the Wheel Cylinder area before removing the bleeder cap and valve while disconnecting the brake pipe fitting from the Wheel Cylinder and applying a cap to the exposed brake pipe end to avert fluid loss and contamination. The next step involves removing all Wheel Cylinder mounting bolts. The j 38400 (Brake Shoe Spanner and Spring Remover) tool allows technicians to spread the brake shoes and extract the Wheel Cylinder from the Brake Backing Plate. To install a new Wheel Cylinder fit it to the Brake Backing Plate by using the j 38400 (Brake Shoe Spanner and Spring Remover) to spread apart the top brake shoes once again. Screw in the Wheel Cylinder mounting bolts and follow up with a torque of 16 nm (12 lb ft). Approach the brake pipe end with caution then install the fitting and torque it to 19 nm (14 lb ft). Tighten the Wheel Cylinder bleeder valve to 8 nm (71 lb in) torque. Install the Brake Drum before completing the bleeding of the hydraulic brake system along with installing the bleeder valve cap. Drum brake adjustment should follow before you install the tire-wheel combination and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the wheel cylinder brake pipe fitting for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the wheel cylinder bolts and slightly spread the top of the brake shoes to take out the wheel cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Cylinder
    Q:
    What is the installation process for the new wheel cylinder for the 2010 Chevrolet HHR? Posted by Customer
    A:
    Spread the top of the brake shoes again, install the wheel cylinder, and secure it by tightening the wheel cylinder bolts to 8 Nm (71 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Cylinder
    Q:
    What should be done after installing the bleeder valve for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Install the brake drum, bleed the hydraulic brake system, and install the bleeder valve cap.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wheel Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Shoes 25994649 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25994649 Brake Shoes is available in the market under the name GM Wheel Cylinder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25994649 Brake Shoes fits certain Chevrolet Cobalt, HHR models, as well as Pontiac G5 models.
The original GM component designated by manufacturer part number 25994649 maintains top performance when functioning as the Cylinder, Wheel Brake Cylinder/Caliper unit at its Rear. The component 25994649 is constructed from durable material and its dimensions span 6.1 x 5.3 x 5.1 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Wheel Cylinder. The part 25994649 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.