How to replace the engine mount on 2010 Chevrolet Impala?

The first step to replace engine mounts should be removal of tire and wheel from the vehicle. You should remove the engine splash shield prior to moving on to the next step. The engineer should take out the nuts which hold the Engine Mount to the vehicle's frame. The first step involves placing an adjustable jack along with a block of wood under the Oil Pan then moving to remove the Engine Mount bracket bolts. Adjustable jack along with a block of wood will lift the engine up before removing the Engine Mount/bracket which later exits the vehicle. Place the Engine Mount/bracket to the engine and install the Engine Mount bracket bolts while following the specified sequence for tightening to 58 nm (43 lb ft). Let the engine reach the frame with the adjustable jack while removing the block of wood afterward. Take out the adjustable jack. Position the Engine Mount onto its frame nuts before torquing them to 50 nm (37 lb ft). After installation of the engine splash shield and tire and wheel the procedure is complete.

OEM 2010 Chevrolet Impala Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Mounts found

View related parts
2010 Chevrolet Impala Strut Part Number: 10345905
$79.45 MSRP: $135.26
You Save: $55.81 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut, Engine Mounting
- Item Weight: 1.40 Pounds
- Item Dimensions: 10.4 x 5.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10345905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Impala Motor Mount Part Number: 10448575
$69.62 MSRP: $118.53
You Save: $48.91 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2010 Chevrolet Impala Mount Bracket Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12594433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LT, LTZ, Police | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2010 Chevrolet Impala Strut Bracket, Passenger Side Part Number: 12577766
$24.60 MSRP: $40.55
You Save: $15.95 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Strut Rear Bracket; Bracket, A/C Compressor Mounting
- Position: Passenger Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 4.4 x 4.3 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12577766
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2010 Chevrolet Impala Strut Mount Part Number: 10345904
$129.22 MSRP: $176.94
You Save: $47.72 (27%)
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.4 x 3.9 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10345904
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2010 Chevrolet Impala Mount Bracket Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10216970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LT, LTZ, Police | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2010 Chevrolet Impala Engine Mount

With a comprehensive array of OEM 2010 Chevrolet Impala Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Engine Mount Parts and Q&A

Q: How to replace the engine mount on 2010 Chevrolet Impala?
A: The first step to replace engine mounts should be removal of tire and wheel from the vehicle. You should remove the engine splash shield prior to moving on to the next step. The engineer should take out the nuts which hold the Engine Mount to the vehicle's frame. The first step involves placing an adjustable jack along with a block of wood under the Oil Pan then moving to remove the Engine Mount bracket bolts. Adjustable jack along with a block of wood will lift the engine up before removing the Engine Mount/bracket which later exits the vehicle. Place the Engine Mount/bracket to the engine and install the Engine Mount bracket bolts while following the specified sequence for tightening to 58 nm (43 lb ft). Let the engine reach the frame with the adjustable jack while removing the block of wood afterward. Take out the adjustable jack. Position the Engine Mount onto its frame nuts before torquing them to 50 nm (37 lb ft). After installation of the engine splash shield and tire and wheel the procedure is complete.