How to replace the LH Motor and Transmission Mount on 2010 Chevrolet Impala?

To replace the left side transmission mount, one must start by picking and supporting the car first. Tire and wheel assembly, left, then splash shield, left engine. Place a transmission jack under the transaxle and identify the upper nuts from transaxle mount on the transaxle bracket and remove it. Gradually lift the transaxle assembly, remove the lower nuts from the frame but take out the transaxle mount. For installation, position the attached new transaxle mount to the frame and fix the lower nuts to 52 nm (38 lb ft). Lower the transaxle because the mount stud can fit into the transexle bracket, and install its upper nuts and tighten to 52 nm (38 lb ft). Eliminate transmission jack; reinstall left engine splash shield; replace left wheel and tire assembly then vehicle should be lowered.

OEM 2010 Chevrolet Impala Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Motor And Transmission Mounts found

View related parts
2010 Chevrolet Impala Transmission Mount
Part Number: 22146688
$54.08 MSRP: $92.89
You Save: $38.81 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.6 x 5.5 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22146688
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LT | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
2010 Chevrolet Impala Motor Mount
Part Number: 10448575
$67.67 MSRP: $147.42
You Save: $79.75 (55%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2010 Chevrolet Impala Transmission Mount, Orange
Part Number: 22146834
$102.92 MSRP: $175.24
You Save: $72.32 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Transmission *Orange; Transfer Case Mount; Mount, Transmission Mounting
- Replaces: 22178939, 22173073
- Item Weight: 2.30 Pounds
- Item Dimensions: 7.1 x 6.4 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22146834
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2010 Chevrolet Impala Transmission Mount
Part Number: 15880685
Product Specifications
- Other Name: Mount, Transmission Mounting; Automatic Transmission Mount; Transfer Case Mount
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.3 x 4.7 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15880685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2010 Chevrolet Impala Motor And Transmission Mount

With a comprehensive array of OEM 2010 Chevrolet Impala Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the LH Motor and Transmission Mount on 2010 Chevrolet Impala?
A: To replace the left side transmission mount, one must start by picking and supporting the car first. Tire and wheel assembly, left, then splash shield, left engine. Place a transmission jack under the transaxle and identify the upper nuts from transaxle mount on the transaxle bracket and remove it. Gradually lift the transaxle assembly, remove the lower nuts from the frame but take out the transaxle mount. For installation, position the attached new transaxle mount to the frame and fix the lower nuts to 52 nm (38 lb ft). Lower the transaxle because the mount stud can fit into the transexle bracket, and install its upper nuts and tighten to 52 nm (38 lb ft). Eliminate transmission jack; reinstall left engine splash shield; replace left wheel and tire assembly then vehicle should be lowered.