Other Name: Handle Assembly-Intermediate Side Door Outside; Exterior Door Handle; Handle, Door Outside Handle
Position: Driver Side
Item Weight: 0.90 Pounds
Item Dimensions: 5.1 x 5.0 x 11.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25989392
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX
2010 GMC Savana 1500 Door Handle
With a comprehensive array of OEM 2010 GMC Savana 1500 Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Savana 1500 Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 GMC Savana 1500 Parts Questions & Experts Answers
Q: How to replace the sliding outer door handle on 2010 GMC Savana 1500?
A: The first step to replace the sliding door outside handle involves removing the sliding door lower trim panel. Start by removing the sliding side door control assembly and following it with a detachment of lock rods from the lock. Begin by removing the nuts and bracket which stabilize the outside door handle to the sliding side door. Afterward separate the sliding side door outside handle from its position. Set the new sliding side door outside handle on the door surface after placing the bracket and nuts correctly before tightening the fasteners to 11 Nm (97 lb in). Begin by bringing back the lock rods to the lock before rehanging the sliding side door control assembly and completing with the installation of the sliding door lower trim panel.