Make sure this part fits

GM 25750066
Pull Handle, Passenger Side

2003-2016 GM

Customer Questions & Expert Answers (28)
GM 25750066 Pull Handle, Passenger Side
GM 25750066 Pull Handle, Passenger Side
  • Part Description
    Handle, Door Trim/Access
  • Position
    Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$35.37 MSRP: $55.36
You Save: $19.99 (37%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2016 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2016 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2016 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2016 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25750066 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25750066 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What needs to be done with the lock rods for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Disconnect the lock rods from the handle and fully remove it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the rivets for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Take out the inside door handle from the door inner panel, followed by the removal of the lock rod and door handle rod from the inside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after releasing the retaining clip for the 2006 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the sliding side door inside handle from the sliding side door control assembly and take it out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for the retaining nuts for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Ensure the retaining nuts are tightened to 11 N.m (97 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear door interior handle for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Remove the right side rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be reattached after the rear run channel for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Reattach the lock rods to the lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the inside door handle bezel for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Align the inside door handle bezel with the front door trim plate and press it towards the door trim panel to engage the retaining tab.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new assembly for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Position the right side rear door outside door handle and license pocket assembly onto the right rear door, ensuring the anti-theft shield is placed between the assembly and the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door exterior handle for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Raise the window completely and remove the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the sliding door inside handle for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Use the Door Handle Clip Remover (J 9886-01) to release the retaining clip on the sliding side door inside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you secure the inside door handle for the 2006 Chevrolet Express 3500? Posted by Customer
    A:
    Install the rivet to secure the inside door handle, followed by the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear door inside handle for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the right side rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be removed from the handle for the 2007 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the lock rods from the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the inside handle of the sliding door for the 2005 GMC Savana 3500? Posted by Customer
    A:
    Use the Door Handle Clip Remover (J 9886-01) to release the retaining clip on the sliding side door inside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after reinstalling the lock rods for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Reattach the sliding side door control assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the sliding door inside handle for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Use the Door Handle Clip Remover (J 9886-01) to release the retaining clip on the sliding side door inside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after disconnecting the lock rods for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Remove the nuts that secure the latch handle to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door exterior handle for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Raise the window completely and remove the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step after installing the assembly for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Reattach the lock rods to the lock and finally, reinstall the right side rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be removed along with the nuts for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Remove the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the sliding door outside handle for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Remove the sliding door lower trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new outside handle for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Position the sliding side door outside handle onto the door, ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the installation process for the outside door handle for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Position the outside door handle back onto the door and secure it with the nuts and bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the installation process for the new inside door handle for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Insert the tabs of the new inside door handle into the rear door inner panel slots, then attach the lock rod and door handle rod to the inside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step after installing the assembly for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Reattach the lock rods to the lock and finally reinstall the right side rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the lower trim panel for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Take out the sliding side door control assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the sliding door inside handle for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Use the Door Handle Clip Remover (J 988601) to release the retaining clip on the sliding side door inside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pull Handle, Passenger Side 25750066 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25750066 Pull Handle, Passenger Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25750066 Pull Handle, Passenger Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 25750066 maintains top performance when functioning as the Handle, Door Trim/Access unit at its Passenger Side. The component 25750066 is constructed from durable material and its dimensions span 5.3 x 5.1 x 24.7 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25750066 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.