Other Name: Handle, Door Inside Assist Handle; Handle, Door Lock Remote Control Inside
Item Weight: 0.40 Pounds
Item Dimensions: 15.5 x 4.7 x 4.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15066475
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2005 GMC Savana 2500 Submodels:
Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
2005 GMC Savana 2500 Door Handle
With a comprehensive array of OEM 2005 GMC Savana 2500 Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Savana 2500 Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 GMC Savana 2500 Parts Questions & Experts Answers
Q: How to replace the outer door handle of a sliding door on 2005 GMC Savana 2500?
A: A person must start door handle replacement by taking off the lower sliding door trim panel. First disconnect the sliding side door control assembly after which you must remove the lock rods from the lock. A person should first detach the bracket and nuts which secure the outside door handle to the sliding side door then separate the outside handle. Start installation by mounting the new sliding side door outside handle to the door according to the Fastener Notice. Use tightening tools to fasten the handle with the bracket and nuts at 11 N.m (97 lb in). The installation process starts with resetting the lock rods onto the lock before proceeding with the sliding side door control assembly and finishing with attachment of the sliding door lower trim panel.