Make sure this part fits

GM 25942275
Handle, Outside, Rear Passenger Side

1996-2009 GM

Customer Questions & Expert Answers (33)
GM 25942275 Handle, Outside, Rear Passenger Side
  • Part Description
    Handle Assembly-Rear Door Outside; Exterior Door Handle
  • Position
    Rear Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$93.52 MSRP: $136.16
You Save: $42.64 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1996-2009 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2009 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
    1996-2009 Chevrolet Express 3500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    1996-1999 Chevrolet P30Base6 Cyl 4.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2009 GMC Savana 1500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    1996-2009 GMC Savana 2500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
    1996-2009 GMC Savana 3500Base, LS, LT, SLE, SLT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25942275 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25942275 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the installation process for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Secure the handle by installing the rivet at the rear edge and reinstall the right side rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the lock rods for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Detach the rear run channel from the door and remove the nuts and the bracket that secure the outside door handle to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step after installation for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Reconnect the lock rods to the lock and reinstall the right side rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door exterior handle for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Raise the window completely and remove the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the sliding door inside handle for the 2006 Chevrolet Express 2500? Posted by Customer
    A:
    Use the Door Handle Clip Remover (J 9886-01) to release the retaining clip on the sliding side door inside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door interior handle for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Begin by removing the front door trim panel and the front door water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What do you do after removing the nuts and bracket for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Take out the outside door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new rear door inside handle for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Position the new rear door inside handle onto the right rear door and attach the lock rods to the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the front door exterior handle for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Raise the window completely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear door interior handle for the 2007 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the right side rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to service and repair the front door interior handle for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Begin by pressing the retaining tab on the inside door handle bezel to release it from the front door trim plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the torque specification for tightening the nuts for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Tighten the nuts to 11 N.m (97 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be removed from the handle for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the lock rods from the handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you secure the inside door handle for the 2006 Chevrolet Express 3500? Posted by Customer
    A:
    Install the rivet to secure the inside door handle, followed by the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step for installation of the new handle for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Position the new rear door inside handle onto the right rear door and reconnect the lock rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be detached from the lock for the 2007 GMC Savana 2500? Posted by Customer
    A:
    The lock rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the process for the 2004 GMC Savana 1500? Posted by Customer
    A:
    Finally, reinstall the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the front door trim panel for the 2009 GMC Savana 2500? Posted by Customer
    A:
    Take out the water deflector and then remove the lock rods from the lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the sliding door inside handle for the 2009 GMC Savana 1500? Posted by Customer
    A:
    Use the Door Handle Clip Remover (J 9886-01) to release the retaining clip on the sliding side door inside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear side door inside handle for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Remove the right side rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the trim panel for the 2003 GMC Savana 3500? Posted by Customer
    A:
    Disconnect the lock rods from the side rear door latch handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in the replacement process for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Reinstall the sliding side door control assembly and put back the sliding door lower trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after reinstalling the lock rods for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Reattach the sliding side door control assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2005 GMC Savana 3500? Posted by Customer
    A:
    Place the sliding side door inside handle back into the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after securing the outside door handle for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Reattach the lock rods to the lock, reinstall the sliding side door control assembly, and finally, put back the sliding door lower trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the lock rods for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Detach the rear run channel from the door and remove the nuts and the bracket that secure the outside door handle to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you begin servicing and repairing the front door interior handle for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Begin by pressing the retaining tab on the inside door handle bezel to release it from the front door trim plate, then remove the bezel from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step after installing the assembly for the 2004 GMC Savana 3500? Posted by Customer
    A:
    Reattach the lock rods to the lock and finally reinstall the right side rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How should the retaining nuts be installed for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Install the retaining nuts for the assembly and tighten them to 11 N.m (97 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the installation process for the outside door handle for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Position the outside door handle back onto the door and secure it with the nuts and bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be removed from the inside handle for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Remove the lock rods from the inside handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you attach the handle during installation for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Attach it to the control assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle, Outside, Rear Passenger Side 25942275 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25942275 Handle, Outside, Rear Passenger Side is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25942275 Handle, Outside, Rear Passenger Side fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 25942275 maintains top performance when functioning as the Handle Assembly-Rear Door Outside; Exterior Door Handle unit at its Rear Passenger Side. The component 25942275 is constructed from durable material and its dimensions span 8.2 x 20.6 x 12.2 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Handle, Door Outside Handle. The part 25942275 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.