Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2019 GMC Savana 2500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
| Page 1 of 2 |Next >
1-20 of 36 Results
GMC Savana 2500 Door Handle
Our website offers an extensive catalog of genuine GMC Savana 2500 Door Handle at unbeatable prices. Every OEM GMC Savana 2500 Door Handle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 2500 Door Handle Parts Questions & Experts Answers
Q: How to replace the front door exterior door handle on GMC Savana 2500?
A: Starting the front door exterior handle replacement process requires total window elevation and subsequent removal of the front door trim panel. Start by removing the water deflector before taking out the lock rods from the lock mechanism. Use upward movements on the rear run channel to get access to the outside Door Handle securing nuts. After extracting the nuts along with the bracket you can remove the outside Door Handle from the door. Remove the outside Door Handle from the door after the handle is removed from its place. Start by placing the outside Door Handle directly onto the door surface followed by lifting the rear run channel to reach the handle studs and installing the nuts with bracket for handle attachment. The nuts should be installed onto the outside Door Handle before they are tightened to 11 nm (97 lb in). You must reconnect the lock rods to the lock before installing the water deflector and finally the front door trim panel.