Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2003-2019 GMC Savana 3500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
| Page 1 of 2 |Next >
1-20 of 36 Results
GMC Savana 3500 Door Handle
Our website offers an extensive catalog of genuine GMC Savana 3500 Door Handle at unbeatable prices. Every OEM GMC Savana 3500 Door Handle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 3500 Door Handle Parts Questions & Experts Answers
Q: How to Replace a Front Door Handle on GMC Savana 3500?
A: The procedure to replace the front door exterior handle requires complete window lift followed by front door trim panel removal before proceeding with the water deflector. The next step includes removing both lock rods from their connection to the lock device before taking out the rear run channel of the door. You must remove the nuts together with the bracket which holds the outside Door Handle to the door so you can pull out the handle. Position the outside Door Handle onto the door opening and fasten it with the nuts and bracket . The installation requires nuts to reach 11 n.m (97 lb in) torque strength as indicated in the fastener notice. When installation is complete you should place the front door trim panel and reinstall the water deflector first followed by attaching the lock rods to the lock and reinstalling the rear run channel before putting the outside Door Handle back on and securing it with the bracket followed by nuts and tightening them at 11 n.m (97 lb in) according to the fastener notice.