Other Name: Handle, Door Inside Assist Handle; Handle, Door Lock Remote Control Inside
Item Weight: 0.40 Pounds
Item Dimensions: 15.5 x 4.7 x 4.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15066475
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2006 GMC Savana 3500 Submodels:
Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2006 GMC Savana 3500 Submodels:
Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2006 GMC Savana 3500 Submodels:
Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
2006 GMC Savana 3500 Door Handle
With a comprehensive array of OEM 2006 GMC Savana 3500 Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 GMC Savana 3500 Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 GMC Savana 3500 Door Handle Parts Questions & Experts Answers
Q: How to service the rear door handle and license pocket on 2006 GMC Savana 3500?
A: You need to remove the right side rear door trim panel as the first step to work on rear door exterior handle and license pocket. The first step involves removing the lock rods then the nuts which secure the right side rear door outside door handle and license pocket assembly. The assembly along with its internal anti-theft shield needs to be removed from the right rear door section. The installation process requires placing the right side rear door outside door handle and license pocket assembly onto the right rear door where the anti-theft shield must be placed between them. Install retaining nuts for the assembly before tightening them to 11 N.m (97 lb in). After the installation of lock rods to the lock you can reinstall the right side rear door trim panel.