How to replace the front wheel bearing, hub, and seal on a 4WD on 2010 GMC Savana 1500?

Before replacing the front wheel components on a 4wd vehicle you need to elevate and support the vehicle. First pull the tire then wheel. Then remove the rotor. Unbolt the Wheel Hub cap and the wheel driveshaft sections including its nut and washer. With the j 45859 (Axle Remover) tool remove the wheel driveshaft connection from the hub and bearing system. Separate the Wheel Speed Sensor bolt and sensor from their position on the Wheel Hub and bearing. You need to unfasten the Wheel Hub and bearing bolts before taking out the hub assembly, bearing, and splash shield from the Steering Knuckle. Apply Wheel Bearing grease inside the Steering Knuckle's bore after removing its surface contaminants and rust. Push the Wheel Hub and bearing onto its proper position on the Steering Knuckle while connecting both mounting bolts. Use a torque wrench to tighten these bolts to 180 nm. Install the Wheel Speed Sensor with its bolt at 18 nm (13 lb ft) torque. Attach the wheel driveshaft retaining nut and washer first and then secure it at 210 nm force before adding the front axle hub cap. Replace the tire and wheel then the rotor onto their proper position and lower the vehicle.

OEM 2010 GMC Savana 1500 Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Bearings found

View related parts
2010 GMC Savana 1500 Wheel Bearing
Part Number: 9436881
$76.25 MSRP: $145.36
You Save: $69.11 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Item Weight: 1.70 Pounds
- Item Dimensions: 5.1 x 1.5 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9436881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
- Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
View related parts
2010 GMC Savana 1500 Wheel Bearing
Part Number: 9428908
$69.42 MSRP: $98.04
You Save: $28.62 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel Outer; Axle Bearings, Shaft Bearings, Grease Cap, Outer Bearing, Bearing Assembly, Front Wheel Outer, Rear Wheel.
- Position: Rear
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.6 x 3.7 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9428908
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
- Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
View related parts
2010 GMC Savana 1500 Axle Bearings, Front
Part Number: 26053326
$11.23 MSRP: $20.06
You Save: $8.83 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Wheel Bearing; Axle Bearing; Output Shaft Bearing; Bearing; Bearings; Bearing, Front Wheel Drive Axle Shaft
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 2.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26053326
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2010 GMC Savana 1500 Wheel Bearing, Rear
Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.4 x 3.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12479031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
- Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
View related parts
2010 GMC Savana 1500 Front Hub
Part Number: 15233113
Product Specifications
- Other Name: Hub, Front Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Assembly; Repair Kit; Axle Bearing.; Hub & Bearing; Hub
- Position: Front
- Replaces: 15112382, 15134584, 15740291
- Item Weight: 14.60 Pounds
- Item Dimensions: 13.8 x 12.4 x 8.2 inches
- Condition: New
- SKU: 15233113
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2010 GMC Savana 1500 Wheel Bearing

With a comprehensive array of OEM 2010 GMC Savana 1500 Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Savana 1500 Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Savana 1500 Parts Questions & Experts Answers

Q: How to replace the front wheel bearing, hub, and seal on a 4WD on 2010 GMC Savana 1500?
A: Before replacing the front wheel components on a 4wd vehicle you need to elevate and support the vehicle. First pull the tire then wheel. Then remove the rotor. Unbolt the Wheel Hub cap and the wheel driveshaft sections including its nut and washer. With the j 45859 (Axle Remover) tool remove the wheel driveshaft connection from the hub and bearing system. Separate the Wheel Speed Sensor bolt and sensor from their position on the Wheel Hub and bearing. You need to unfasten the Wheel Hub and bearing bolts before taking out the hub assembly, bearing, and splash shield from the Steering Knuckle. Apply Wheel Bearing grease inside the Steering Knuckle's bore after removing its surface contaminants and rust. Push the Wheel Hub and bearing onto its proper position on the Steering Knuckle while connecting both mounting bolts. Use a torque wrench to tighten these bolts to 180 nm. Install the Wheel Speed Sensor with its bolt at 18 nm (13 lb ft) torque. Attach the wheel driveshaft retaining nut and washer first and then secure it at 210 nm force before adding the front axle hub cap. Replace the tire and wheel then the rotor onto their proper position and lower the vehicle.