How to Replace the Emblem on Rear Fascia on Buick Century?

You will need both a Heat Gun model J 25070 and a 3M(TM) Scotch Brite molding adhesive remover disk 3M(TM) P/N 07502 to repair the Buick rear fascia emblem/nameplate. Apply tape first to shield the mounting area and establish setup marks before installation. Point the Heat Gun at the emblem/nameplate for 30 seconds while applying circular motion until the object gets sufficient heat. Use a plastic tipped flat tool to defend paint during removal. For body panels use the 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502), while for plastic panels use a lint-free cloth soaked in VMP naphtha diluted with water or isopropyl alcohol. Wipe the application space with a dry lint-free cloth and the same cleaning solution before letting it dry completely. Mark where you need to put the emblem using tape then raise mounting surface temperature to 80-105°F (27-41°C) but keep emblem/nameplate near 85-90°F (29-32°C). Place the emblem/nameplate in the recessed area and apply even force to the mounting surface before pressing the device against it. Take off adhesive tape from where the item will be mounted.

OEM Buick Century Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Emblems found

View related parts
Buick Century Nameplate Part Number: 25520242
$13.11 MSRP: $18.75
You Save: $5.64 (31%)
ADD TO CART
Product Specifications
- Other Name: F-Plate; Plate, Radiator Grille And Front End Ornamentation
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Buick Century | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Emblem Part Number: 10242494
$19.99
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Roof Panel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Buick Century | Custom, Limited, Special | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Century Nameplate, Front Part Number: 10255135
$20.87 MSRP: $31.06
You Save: $10.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Front Side Door; Plate Assembly, Front Side Door
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 Buick Century | Custom | 6 Cyl 3.1 L GAS
View related parts
Buick Century Nameplate, Front Part Number: 10255134
$12.96 MSRP: $19.29
You Save: $6.33 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Front Side Door; Plate Assembly, Front Side Door
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 Buick Century | Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Century Nameplate, Front Part Number: 10255132
$18.21 MSRP: $28.51
You Save: $10.30 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Front Side Door; Plate Assembly, Front Side Door
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2002 Buick Century | Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Century Emblem, Front Part Number: 10273068
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Century | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
Buick Century Emblem, Front Part Number: 25524988
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1988 Buick Century | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Century Ornament, Front Part Number: 25519478
Product Specifications
- Other Name: Ornament, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Buick Century | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Ornament, Front Part Number: 25515734
Product Specifications
- Other Name: Ornament, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1986 Buick Century | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Ornament, Front Part Number: 25515728
Product Specifications
- Other Name: Ornament, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick Century | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Cap Part Number: 22532104
Product Specifications
- Other Name: Emblem-Wheel Trim Cover; Wheel Center Cap; Lock; Emblem; Emblem, Wheel Cover Appearance; Insert, Wheel Cover Appearance
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1996 Buick Century | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Century Emblem, Front Part Number: 25518387
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick Century | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Nameplate, Front Part Number: 25506377
Product Specifications
- Other Name: Plate; Plate, Radiator Grille and Front End Ornamentation; "Buick" Front End Ornamentation.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick Century | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Emblem Part Number: 25500397
Product Specifications
- Other Name: Emblem, Horn Button
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Century | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Emblem Part Number: 22533743
Product Specifications
- Other Name: Plate; Nameplate; Plate, Front Fender Name
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987 Buick Century | Custom, Estate Wagon, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Century Nameplate, Rear Part Number: 20477076
Product Specifications
- Other Name: Plate Assembly-Rear Compartment Lid Name; Plate,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Buick Century | Custom, Limited, Special | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Century Joint Cover, Rear Part Number: 20260430
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Buick Century | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Nameplate, Rear Part Number: 20203201
Product Specifications
- Other Name: Plate, Rear Wheel Opening (A-Body); Plate, RearWheel; QtrPanelLF; FrontWheel; RearQtrTransfer; RearQtrPanel; FrontFender
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Buick Century | Custom | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Century Emblem Part Number: 10130299
Product Specifications
- Other Name: Emblem, Roof Panel; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1993 Buick Century | Custom, Limited, Special, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL

Buick Century Emblem

Want to cut long-term maintenance and repair costs? Choose OEM Emblem. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Century parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Century Emblem includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick Century Emblem has become synonymous with Buick brand reliability and performance as it has appeared across all Century models running from 1936 through 2005. As a hood ornament or flat attachment the emblem serves dual purposes by expressing the Buick manufacturer while elevating the visual attractiveness and brand identity of the Buick Century vehicles. The visual identity of Buick evolved through time as a demonstration that the company combined innovation with maintaining their influential brand identity. Each Buick Century model by maintaining distinct identities because the emblem works with all Century variations to build upon the quality and durability association that defines the Buick brand. The emblem serves as an essential element to improve safety aspects and operational efficiency of the vehicle while demonstrating the make's superiority in engineering. The car Emblem distinguishes itself in the automotive market through its customizable colors and finishes which serve to represent the brand while simultaneously expressing driver style. If you observe a the company Century vehicle you should understand that the emblem represents both the capability performance and durability which the manufacturer automobiles are known for throughout history. Through its deep heritage combined with commitment to excellence the brand model Emblem maintains its importance to the automaker history.

Buick Century Emblem Parts Questions & Experts Answers

Nameplate, Front
10255134
Q: How to Replace the Emblem on Rear Fascia on Buick Century?
A:
You will need both a Heat Gun model J 25070 and a 3M(TM) Scotch Brite molding adhesive remover disk 3M(TM) P/N 07502 to repair the Buick rear fascia emblem/nameplate. Apply tape first to shield the mounting area and establish setup marks before installation. Point the Heat Gun at the emblem/nameplate for 30 seconds while applying circular motion until the object gets sufficient heat. Use a plastic tipped flat tool to defend paint during removal. For body panels use the 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502), while for plastic panels use a lint-free cloth soaked in VMP naphtha diluted with water or isopropyl alcohol. Wipe the application space with a dry lint-free cloth and the same cleaning solution before letting it dry completely. Mark where you need to put the emblem using tape then raise mounting surface temperature to 80-105°F (27-41°C) but keep emblem/nameplate near 85-90°F (29-32°C). Place the emblem/nameplate in the recessed area and apply even force to the mounting surface before pressing the device against it. Take off adhesive tape from where the item will be mounted.