ChevyParts
My Garage
My Account
Cart
OEM Buick Century Rack and Pinion Boot
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Rack and Pinion Boots found
Buick Century Tie Rod Boot
Part Number: 26035404$248.28 MSRP: $390.65You Save: $142.37 (37%)Ships in 1-2 Business Days
Buick Century Rack and Pinion Boot
Our website offers an extensive catalog of genuine Buick Century Rack and Pinion Boot at unbeatable prices. Every OEM Buick Century Rack and Pinion Boot comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Century Rack and Pinion Boot Parts Questions & Experts Answers
- Q: How to replace the rack and pinion boot and breather tube on a Magnasteer system on Buick Century?A: The j 22610 service boot clamp installer (J 22610) helps remove the outer tie rod allowing the hex jam nut's removal from the inner tie rod assembly. The process begins by using the j 22610 service boot clamp installer to remove the tie rod end clamp from the Rack And Pinion Boot. Then cut off the boot clamp using side cutters and discard the clamp. Prior to removing the breather tube or Rack and Pinion Boot, record the breather tube's position on the gear assembly. After marking the breather tube position reverse the order by first removing the Rack and Pinion Boot and the breather tube. Prior to boot assembly install the boot clamp on the Rack and Pinion Boot. Then apply lubrication to both the inner tie rod assembly and Rack And Pinion gear assembly before fitting the Rack and Pinion Boot onto the inner tie rod assembly. Secure the breather tube in position at the Rack and Pinion Boot's molded nipple along the guide mark to achieve proper boot seating within the gear assembly groove. Use the j 22610 service boot clamp installer (J 22610) to fix the boot clamp onto the Rack and Pinion Boot before clamping the installation. Insert pliers onto the Rack and Pinion Boot so the tie rod end clamp can be installed. Next install the hex jam nut to finish the process near the inner tie rod assembly .
Related Buick Century Parts
Buick Century Power Steering Pump
Buick Century Rack And Pinion
Buick Century Power Steering Hose
Buick Century Power Steering Reservoir
Buick Century Rack & Pinion Bushing
Buick Century Steering Column
Buick Century Steering Column Seal
Buick Century Steering Gearbox
Buick Century Steering Shaft
Buick Century Tie Rod
Buick Century Tie Rod End
Buick Century Upper Steering Column Bearing