How to replace the ignition lock cylinder on Buick LaCrosse?

You must disable sir system by disconnecting the battery negative cable to replace the ignition switch lock cylinder. Position the ignition cylinder lock to start position. You need to release the lock cylinder retaining pin through the access hole of the Ignition Lock Cylinder case to remove both components. Hold the upper steering trim piece as you lift it before inserting an awl through the Ignition Lock Cylinder case access hole. Push down on the Ignition Lock Cylinder retaining pin while holding it and move the cylinder to the run position then remove it from the steering column. Begin the installation process by putting the steering column trim covers back on. Push the Ignition Lock Cylinder through the positioning tab slot until it snaps into place in the Ignition Lock Cylinder case. Begin by turning on sir mode while connecting the negative Battery Cable before conducting passlock learn steps.

OEM Buick LaCrosse Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Lock Cylinders found

View related parts
Buick LaCrosse Ignition Lock Cylinder Part Number: 15794826
$92.55 MSRP: $126.71
You Save: $34.16 (27%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder; Cylinder, Ignition Switch
- Replaces: 19120038, 25756079
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse Ignition Lock Cylinder Part Number: 19207991
$45.33 MSRP: $91.81
You Save: $46.48 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit, Ignition Lock (Uncoded); Ignition Cylinder; Cylinder Kit, Ignition Switch; Cylinder, Ignition Switch
- Replaces: 15822351, 89024257
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse Ignition Lock Cylinder Part Number: 20766607
$32.35 MSRP: $60.76
You Save: $28.41 (47%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit, Ignition Lock (Uncoded); Lock Cylinder; Ignition Cylinder; Cylinder Kit, Ignition Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Buick LaCrosse | Base, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

Buick LaCrosse Ignition Lock Cylinder

Want to cut long-term maintenance and repair costs? Choose OEM Ignition Lock Cylinder. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LaCrosse parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LaCrosse Ignition Lock Cylinder includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick manufactures the Buick LaCrosse Ignition Lock Cylinder as one of the key parts of a car that support the reputation and efficiency of Buick vehicles. This ignition lock cylinder enables the drivers to switch on their engines freely by slotting and or spinning the car key, hence smooth driving. The Buick LaCrosse Ignition Lock Cylinder is sufficiently safe for it is designed using coded ignition keys and a computer chip to dialogue with the car computer in order to unlock the car and start it respectively. Thus, compatibility with the LaCrosse models, both the first and second generation, should reach a large number of motorists who face this issue. The operation of the ignition lock cylinder could be affected by wear and tear if the Buick LaCrosse has been in use for sometime; this could cause challenges in starting the vehicle, or sudden power-offs. The Buick LaCrosse Ignition Lock Cylinder fits well in the automotive industry as a result of its well-built complex structure and design configuration besides as functioning to improve the efficiency of the vehicle and lessen the risks of a car. Such factors as the possession of an exclusive key and tumbler features make this ignition lock cylinder a representation of the Buick brand's quality and security. Thus, the Buick LaCrosse Ignition Lock Cylinder plays an important role in making or breaking one's confidence in every trip.

Buick LaCrosse Ignition Lock Cylinder Parts Questions & Experts Answers

Ignition Lock Cylinder
19207991
Q: How to replace the ignition lock cylinder on Buick LaCrosse?
A:
You must disable sir system by disconnecting the battery negative cable to replace the ignition switch lock cylinder. Position the ignition cylinder lock to start position. You need to release the lock cylinder retaining pin through the access hole of the Ignition Lock Cylinder case to remove both components. Hold the upper steering trim piece as you lift it before inserting an awl through the Ignition Lock Cylinder case access hole. Push down on the Ignition Lock Cylinder retaining pin while holding it and move the cylinder to the run position then remove it from the steering column. Begin the installation process by putting the steering column trim covers back on. Push the Ignition Lock Cylinder through the positioning tab slot until it snaps into place in the Ignition Lock Cylinder case. Begin by turning on sir mode while connecting the negative Battery Cable before conducting passlock learn steps.