Other Name: Actuator, Air Conditioner Control; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Temperature Door Actuator; Switch; Controller; Actuator; Actuator, A/C Vacuum Control; Actuator, A/C Control
Replaces: 16163982
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1997-2004 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
Other Name: Actuator, Air Conditioner Control; HVAC Air Adjustment Control Motor; HVAC Heater Blend Door Actuator; Gear; Actuator; Actuator, A/C Control
Position: Driver Side
Replaces: 13333726, 20782699
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2011-2017 Buick Regal | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
Other Name: Actuator Assembly, Mode Valve; HVAC Heater Blend Door Actuator; Actuator, A/C Control
Replaces: 1996751
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1988-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
Buick Regal Blend Door Actuator
Our website offers an extensive catalog of genuine Buick Regal Blend Door Actuator at unbeatable prices. Every OEM Buick Regal Blend Door Actuator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Regal Blend Door Actuator Parts Questions & Experts Answers
Q: How to replace the defroster Blend Door Actuator on Buick Regal?
A: To replace the defroster actuator remove the cross vehicle beams, and notice that it has disconnected a vacuum line from the defroster vacuum actuator. Turn the lever of defroster valve all the way rear (counter clockwise) and cautiously position screwdriver between the lower edge of the lever and the projecting wall of the HVAC Module case beneath the lever to secure in this position. Lift up to retract the defroster vacuum actuator retaining table, then gently turn the defroster vacuum actuator upward and in the forward direction to pull it from the HVAC module case. Disconnect the vacuum actuator pushrod from the defrost valve lever and take off the vacuum actuator. For installation, use the vacuum actuator pushrod to connect it to the defrost valve lever, carefully move it rearward and then downward and align the actuator slots to the case of the HVAC module, and then press the vacuum actuator towards the HVAC module and attach it with its retaining tab. Lastly, attach the vacuum lines to the defroster vacuum actuator, and put back the cross vehicle beam.