Other Name: Relay Assembly, Fan Control *Black; Daytime Running Light, Rear Window Defroster, Multi Purpose, Cooling Fan, ABS Relay; Fan Relay; automotive relay series for interior, engine, body & control systems.
Q: How to service the Headlight Relay on Cadillac DeVille?
A: The first step when servicing the headlamp relay is to open the hood then remove the protective cover from the underhood fuse block. You need to remove the high or low beam headlamp relay (3 or 4) from the underhood fuse block. You should install the high or low headlamp relay (3 or 4) into the underhood fuse block after which you should put on the protective cover and finish by closing the hood.
Q: How to replace the headlight relay on Cadillac Catera?
A: Users should begin by taking out the self-locking screws from the I/P driver knee bolster energy absorber before sliding it upward untill the tabs release for complete removal. Remove both the low beam relay and its corresponding high beam relays LH and RH from the convenience center. Insert the low beam relay together with high beam relays LH and RH into the convenience center before pulling down the I/P driver knee bolster energy absorber to fasten it to its designated tabs. Secure the I/P driver knee bolster energy absorber by installing self-locking screws until they reach full seating on the component without screw striping.
Q: How to replace the headlight relay on Cadillac Seville?
A: Start replacement of the headlamp relay by opening the hood and supporting it before removing the protective cover from the underhood fuse block. From the underhood fuse block remove either the high beam headlamp relay or the low beam headlamp relay. To complete the installation place the high beam headlamp relay or the low beam headlamp relay inside the underhood fuse block then restore the protective cover before closing the hood.