How to replace the lash adjuster on the right side on Cadillac XLR?

In order to replace the Lash Adjuster on the right, please first remove the right valve rocker arms so that the camshaft follower must remain matched with the shla and its assembly location was original. Then, take out the shla from the right Cylinder Head bores and clean the dull and check the lash adjusters. Make certain the Crankshaft is in the top dead center (TDC) for the #1 cylinder prior to infusing the shla with a clean engine oil, without damaging the pivot sphere region of the shla. Now lubricate the shla bores of the Cylinder Head using clean engine oil, install shla into bores, and re-install right valve rocker arms.

OEM Cadillac XLR Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
Cadillac XLR Valve Lifters, Green Line
Part Number: 12686787
$14.78 MSRP: $23.17
You Save: $8.39 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjuster Assembly-Hydraulic Valve Lash; Filler Cap O-Ring; Adjuster, Engine Valve Lifter; Adjuster, Engine Valve
- Replaces: 12572638, 24100005
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

Cadillac XLR Lash Adjuster

Our website offers an extensive catalog of genuine Cadillac XLR Lash Adjuster at unbeatable prices. Every OEM Cadillac XLR Lash Adjuster comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac XLR Lash Adjuster Parts Questions & Experts Answers

Valve Lifters, Green Line
12686787
Q: How to replace the lash adjuster on the right side on Cadillac XLR?
A: In order to replace the Lash Adjuster on the right, please first remove the right valve Rocker Arms so that the camshaft follower must remain matched with the shla and its assembly location was original. Then, take out the shla from the right Cylinder Head bores and clean the dull and check the lash adjusters. Make certain the Crankshaft is in the top dead center (TDC) for the #1 cylinder prior to infusing the shla with a clean engine oil, without damaging the pivot sphere region of the shla. Now lubricate the shla bores of the Cylinder Head using clean engine oil, install shla into bores, and re-install right valve rocker arms.