How to Replace the ABS Control Module in a Brake Pressure Modulator Valve (BPMV) System on Chevrolet Avalanche 1500?

Beginning bpmv replacement requires a first step of cleaning the electric hydraulic control unit (EHCU) space to stop abs component contamination. Eliminate any dirt surrounding the ehcu before you detach the electric connector which is connected to the electronic brake control module (EBCM) . The process to disconnect the brake lines from the bpmv requires tagging and proper orderly organization of the lines. Remove the bolts holding the ehcu mounting bracket on the frame rail until the ehcu becomes accessible for removal from the vehicle. After removing bolts that secure the ehcu mounting bracket to the bpmv the next step is removing bolts from the ebcm that might require gentle force for extraction. Uses of pry tools against ebcm or bpmv are forbidden to avoid damage, while new bolts must replace all ebcm mounting hardware. The ebcm mounting surfaces must be cleaned with a new clean cloth before working with the bpmv. Install the ebcm onto the bpmv while using new ebcm bolts which need to be tightened to 5 nm (39 inch lbs.) using an x-pattern. Exclude rtv and all other sealer substances from ebcm gasket surfaces during assembly. Install the bpmv onto the ehcu bracket using new bolts that you should tighten to 9 nm (7 ft. Lbs.). Reinstall the ehcu onto the vehicle frame before tightening all ehcu bracket bolts to 25 nm (18 ft. Lbs.). The ebcm requires connection of its electrical connectors and the brake pipes need to be positioned correctly by the plastic frame bracket before they are installed onto the bpmv with fittings torqued to 25 nm (18 ft. Lbs.). Conclude the task by performing abs automated bleed procedure (W/JL4).

OEM Chevrolet Avalanche 1500 ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 ABS Control Modules found

View related parts
Chevrolet Avalanche 1500 Control Module
Part Number: 19244895
$790.28 MSRP: $1593.66
You Save: $803.38 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module; ABS Control Unit
- Replaces: 19122252, 88982938, 88982305
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Control Module
Part Number: 19244897
$761.07 MSRP: $1206.65
You Save: $445.58 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module; ABS Control Unit
- Replaces: 88935641, 88982296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Avalanche 1500 | Base, North Face, On Road Edition, Z71 | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Pressure Valve
Part Number: 88983913
Product Specifications
- Other Name: Valve, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve, Electronic Brake Control
- Replaces: 88982364, 88948552
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Avalanche 1500 | Base, North Face, On Road Edition, Z71 | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Pressure Valve
Part Number: 19149234
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve, Electronic Brake Control
- Replaces: 12475232, 12476308, 12478048, 12472988, 12475563, 88982306, 88935631, 88964302, 88935847
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Pressure Valve
Part Number: 19122463
Product Specifications
- Other Name: Valve, Brake Pressure Mode; ABS Control Module; Modulator Valve; Valve, Electronic Brake Control
- Replaces: 19133278, 88982909, 19149034
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006, 2003-2004 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Modulator Valve
Part Number: 89027166
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; Valve, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Avalanche 1500 | LS, LT, Z66, Z71 | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Control Module
Part Number: 88982365
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Avalanche 1500 | Base, North Face, Z71 | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Control Module
Part Number: 19244903
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module; ABS Control Unit
- Replaces: 19148796, 19301631, 88982937
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chevrolet Avalanche 1500 | Base, LS, LT, On Road Edition, WBH, Z66 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Modulator Valve
Part Number: 19121925
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; Valve, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Avalanche 1500 | LS, LT, Z66, Z71 | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Pressure Valve
Part Number: 15269817
Product Specifications
- Other Name: Modulator Valve; ABS Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Avalanche 1500 | LS, LT, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Chevrolet Avalanche 1500 ABS Control Module

Our website offers an extensive catalog of genuine Chevrolet Avalanche 1500 ABS Control Module at unbeatable prices. Every OEM Chevrolet Avalanche 1500 ABS Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Avalanche 1500 ABS Control Module Parts Questions & Experts Answers

Pressure Valve
19122463
Q: How to Replace the ABS Control Module in a Brake Pressure Modulator Valve (BPMV) System on Chevrolet Avalanche 1500?
A: Beginning bpmv replacement requires a first step of cleaning the electric hydraulic control unit (EHCU) space to stop abs component contamination. Eliminate any dirt surrounding the ehcu before you detach the electric connector which is connected to the electronic brake control module (EBCM) . The process to disconnect the Brake Lines from the bpmv requires tagging and proper orderly organization of the lines. Remove the bolts holding the ehcu mounting bracket on the frame rail until the ehcu becomes accessible for removal from the vehicle. After removing bolts that secure the ehcu mounting bracket to the bpmv the next step is removing bolts from the ebcm that might require gentle force for extraction. Uses of pry tools against ebcm or bpmv are forbidden to avoid damage, while new bolts must replace all ebcm mounting hardware. The ebcm mounting surfaces must be cleaned with a new clean cloth before working with the bpmv. Install the ebcm onto the bpmv while using new ebcm bolts which need to be tightened to 5 nm (39 inch lbs.) using an x-pattern. Exclude rtv and all other sealer substances from ebcm gasket surfaces during assembly. Install the bpmv onto the ehcu bracket using new bolts that you should tighten to 9 nm (7 ft. Lbs.). Reinstall the ehcu onto the vehicle frame before tightening all ehcu bracket bolts to 25 nm (18 ft. Lbs.). The ebcm requires connection of its electrical connectors and the brake pipes need to be positioned correctly by the plastic frame bracket before they are installed onto the bpmv with fittings torqued to 25 nm (18 ft. Lbs.). Conclude the task by performing abs automated bleed procedure (W/JL4).

Related Chevrolet Avalanche 1500 Parts

Browse Chevrolet Avalanche 1500 ABS Control Module by Years

2006 2005 2004 2003 2002