How to replace the front air bag sensor on Chevrolet Blazer?

To replace the inflatable restraint front end discriminating sensor, disable the SIR system first. Do not hit or shock the sensor, and make sure to firmly attach it before turning on the power to protect against SIR deployment, and personal injury. With the OPC off-road equipment, remove the off-road skid plate, detach the connector position assurance (CPA) first from the sensor harness connector and then the harness connector from the sensor. Find your drilling drill, get ready the mounting rivets, and pull out the mounting rivets. Then remove the sensor from the vehicle. In case the sensor mounting holes or fasteners are ruined, readjust and replace the wrongly installed rivet by removing and disposing of it, then reattach the sensor with a new rivet. If a second fastening repair is required remove untightened rivet, enlarge the mounting holes of die lower radiator support to 9.0 mm (0.35 in), insert and properly seat the rivnut, and fasten the sensor with the screw, tightening fasteners to 8.0 N.m (71 lb in). To install, clean the mounting surface and install the sensor horizontally to the lower radiator support directing the arrow toward the front of the vehicle. Attach the inflatable restraint front end discriminating sensor mounting rivets (GM P/N 15715058) and re-establish the harness connector and install the CPA. If available, reinstall the off-road skid plate, and lastly, activate your SIR system.

OEM Chevrolet Blazer Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Air Bag Sensors found

View related parts
Chevrolet Blazer Rear Sensor Part Number: 13509729
$183.47 MSRP: $269.47
You Save: $86.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Airbag Remote Impact; Occupant Detection Sensor; Air Bag Sensor; Impact Sensor; Front and Side Impact Sensor; Passenger Discriminating Sensor; Inflatable Restraint System.
- Replaces: 13583353, 13593676
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2022 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Impact Sensor Part Number: 13514062
$212.16 MSRP: $308.88
You Save: $96.72 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Airbag Remote Impact; Front Sensor; Side Impact Sensor; Center Sensor; Side Sensor
- Replaced by: 13583355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2022 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Impact Sensor Part Number: 13544409
$199.45 MSRP: $298.19
You Save: $98.74 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Airbag Side Impact; Front Sensor; Side Impact Sensor; Side Sensor; Sensor, Inflatable Restraint System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Rear Sensor, Front Part Number: 13544407
$207.59 MSRP: $310.36
You Save: $102.77 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Airbag Front End Discriminating; Impact Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Side Sensor; Sensor, Inflatable Restraint System
- Position: Front
- Replaced by: 13563168
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Impact Sensor, Driver Side Part Number: 16240665
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Front Sensor; Sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Impact Sensor, Passenger Side Part Number: 16240655
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Front Sensor; Sensor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Impact Sensor, Driver Side Part Number: 16182195
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Front Sensor; Sensor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Impact Sensor, Passenger Side Part Number: 16182185
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Front Sensor; Sensor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Rear Sensor Part Number: 16168845
Product Specifications
- Other Name: Sensor, Inflatable Restraint System; Air Bag Sensor; Arming Sensor; Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS

Chevrolet Blazer Air Bag Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Air Bag Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Blazer parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Blazer Air Bag Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Blazer Air Bag Sensor is one of the minor yet significant parts that reveal Chevrolet's concern in safety and durability. This sophisticated Air Bag Sensor commonly referred to as crash sensor is essential to determine impacts per collision and guarantee the efficiency of air bags to respond on time and whisk the passengers from harm. The Chevrolet Blazer started rolling out in some markets in 2019 and has gone through subsequent models, and all the models employ different versions of the Air Bag Sensor that is developed to improve the vehicle's efficiency and durability. All the mentioned sensors are aimed at achieving precise identification of an impact as well as its immediate recognition what will be important for the protection of all the residents. Chevrolet Blazer integrates compatibility with a wide power plant alternative: as is the powerful 3.6L V6 engine, and improvement of Air Bag Sensor, as it increases the efficiency and safety of the vehicle. In particular, it is worth to emphasise that the Chevrolet Blazer Air Bag Sensor can be considered as the market leaders in the automotive industry because of the compatibility with Chevrolet Infotainment 3, which gives real-time information and analytics. All these create not only a better safety feature of the vehicle but also an improved driving experience. That is why Chevrolet Blazer, with reliable and powerful Air Bag Sensor, is still one of the most demanded SUVs on the market for those who appreciate comfort and design along with safety.

Chevrolet Blazer Air Bag Sensor Parts and Q&A

Impact Sensor, Driver Side
16240665
Q: How to replace the front air bag sensor on Chevrolet Blazer?
A:
To replace the inflatable restraint front end discriminating sensor, disable the SIR system first. Do not hit or shock the sensor, and make sure to firmly attach it before turning on the power to protect against SIR deployment, and personal injury. With the OPC off-road equipment, remove the off-road skid plate, detach the connector position assurance (CPA) first from the sensor harness connector and then the harness connector from the sensor. Find your drilling drill, get ready the mounting rivets, and pull out the mounting rivets. Then remove the sensor from the vehicle. In case the sensor mounting holes or fasteners are ruined, readjust and replace the wrongly installed rivet by removing and disposing of it, then reattach the sensor with a new rivet. If a second fastening repair is required remove untightened rivet, enlarge the mounting holes of die lower radiator support to 9.0 mm (0.35 in), insert and properly seat the rivnut, and fasten the sensor with the screw, tightening fasteners to 8.0 N.m (71 lb in). To install, clean the mounting surface and install the sensor horizontally to the lower radiator support directing the arrow toward the front of the vehicle. Attach the inflatable restraint front end discriminating sensor mounting rivets (GM P/N 15715058) and re-establish the harness connector and install the CPA. If available, reinstall the off-road skid plate, and lastly, activate your SIR system.