How to replace the Air Bag Clockspring in the Steering Wheel on Chevrolet Camaro?

First, turn off the sir system. Then remove the inflatable restraint Steering Wheel module and the Steering Wheel for removal of the inflatable restraint Steering Wheel module coil. Then, remove the wire harness straps that is holding the steering column wire. Proceed to detaching the retaining ring as well as taking out the inflatable restraint Steering Wheel module coil from the Steering Shaft. Before installation, the air bag clock spring assembly must be centered. Run the air bag clock spring assembly connectors through the steering column and insert the existing air bag clock spring assembly on the Steering Shaft assembly by placing it properly and lining up the opening with the horn tower and the locating bump on the end between the two bones for the lock housing cover/and sleeve assembly; and snap it on to the Steering Shaft assembly. If a new air bag clock spring assembly is needed, assemble the pre-centered air bag clock spring assembly to the Steering Shaft assembly and position it, align the opening, and remove and dispose of the centering tab, and install the retaining ring into the Steering Shaft assembly. It is very important to tug all the wires so as to eliminate all kinks that might be found within the steering column assembly to avoid damaging the wire harness. At last, install the wiring protector and wire harness straps to the steering column, and thereafter, the Steering Wheel, the inflatable restraint Steering Wheel module, and activate the sir system.

OEM Chevrolet Camaro Air Bag Clockspring

Steering Wheel Airbag Coil

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Clocksprings found

View related parts
Chevrolet Camaro Clockspring
Part Number: 84205928
$83.72 MSRP: $124.58
You Save: $40.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Steering Wheel Airbag; Air Bag Clockspring; Coil, Inflatable Restraint System
- Replaces: 23491040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Clockspring
Part Number: 84205927
$78.34 MSRP: $116.58
You Save: $38.24 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Steering Wheel Airbag; Air Bag Clockspring; Coil, Inflatable Restraint System
- Replaces: 23465301
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Clockspring
Part Number: 22942867
$47.69 MSRP: $70.97
You Save: $23.28 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Steering Wheel Airbag; Air Bag Clockspring; Coil, Inflatable Restraint System
- Replaces: 20817699, 20810972, 22758271
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Coil Assembly
Part Number: 26041005
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil; Clockspring; Coil Kit, Inflatable Restraint System
- Replaces: 26053264
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1998 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Air Bag Module
Part Number: 26013854
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil Assembly; Clockspring; Coil Kit, Inflatable Restraint System; Front Door Trim
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chevrolet Camaro | Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Clockspring
Part Number: 26072753
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint System; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Clockspring
Part Number: 26072752
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint System; Air Bag Clockspring
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro Air Bag Clockspring

Our website offers an extensive catalog of genuine Chevrolet Camaro Air Bag Clockspring at unbeatable prices. Every OEM Chevrolet Camaro Air Bag Clockspring comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Camaro Air Bag Clockspring Parts Questions & Experts Answers

Clockspring
26072753
Q: How to replace the Air Bag Clockspring in the Steering Wheel on Chevrolet Camaro?
A: First, turn off the sir system. Then remove the inflatable restraint Steering Wheel module and the Steering Wheel for removal of the inflatable restraint Steering Wheel module coil. Then, remove the wire harness straps that is holding the steering column wire. Proceed to detaching the retaining ring as well as taking out the inflatable restraint Steering Wheel module coil from the Steering Shaft. Before installation, the air bag clock spring assembly must be centered. Run the air bag clock spring assembly connectors through the steering column and insert the existing air bag clock spring assembly on the Steering Shaft assembly by placing it properly and lining up the opening with the horn tower and the locating bump on the end between the two bones for the lock housing cover/and sleeve assembly; and snap it on to the Steering Shaft assembly. If a new air bag clock spring assembly is needed, assemble the pre-centered air bag clock spring assembly to the Steering Shaft assembly and position it, align the opening, and remove and dispose of the centering tab, and install the retaining ring into the Steering Shaft assembly. It is very important to tug all the wires so as to eliminate all kinks that might be found within the steering column assembly to avoid damaging the wire harness. At last, install the wiring protector and wire harness straps to the steering column, and thereafter, the Steering Wheel, the inflatable restraint Steering Wheel module, and activate the sir system.