How to replace the evaporator core on Chevrolet Camaro?

The first step towards replacing the Evaporator core is to drain engine coolant while recovering the refrigerant. Begin by detaching the Heater Core and you should remove the temperature control cable bolt along with the cable from the module. The nex step involves taking off the accumulator bolt at the module while discarding the o-ring seal. You should next uninstall the air conditioning (NC) Evaporator tube bolt from the module while disposing of the o-ring seal. The heater rear case requires removal of its bolts before dropping it to free the upper case clip for complete separation. Use a small hand saw to cut the perforated part of the hvac Evaporator module for reusing purposes while setting up a mat underneath on the passenger floor to catch any water leak. Users must remove the a/c Evaporator bracket nut followed by the bracket before taking out bolts located on the engine compartment side of the a/c Evaporator upper and lower case to create a slight opening. After removing the Evaporator seal and the Evaporator you should transfer the Evaporator air filter to the new part. Place the new a/c Evaporator as well as a new a/c Evaporator seal while applying sealer between the Evaporator upper and lower case but avoid using epoxy glue. Secure the bolts to the engine compartment side of the a/c Evaporator upper and lower case while tightening them to 2 n.m (18 in). Reinstall the a/c Evaporator bracket by securing its bracket bolt at 2 nm torque. Set the perforated portion of the Evaporator module in place and bond it with epoxy glue while waiting for the adhesive to dry. A watertight condition requires you to grade the sealant from both the interior and exterior surfaces. Installation of the heater rear case begins with sliding it upward to let the upper clip engage followed by snap engagement on the left edge to the distributor case while installing bolts which require a torque setting of 2.0 n.m (18 lb in). Fasten the new o-ring seal first then install and tighten the a/c Evaporator tube bolt at the module to 16 n.m (12 lb ft). Fasten the module with another new o-ring seal before installing the accumulator bolt. Then tighten it to 16 n.m (12 lb ft). Use the bolt to connect the temperature control cable on the module while tightening it to 1.9 n.m (17 lb in). Put back the Heater Core then recharge the refrigerant before filling up the cooling system.

OEM Chevrolet Camaro Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Evaporators found

View related parts
Chevrolet Camaro Evaporator Core Part Number: 92229744
$217.80 MSRP: $447.58
You Save: $229.78 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Kit-A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator Kit, A/C Evaporator; Evaporator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Evaporator Core Part Number: 84037084
$156.51 MSRP: $283.28
You Save: $126.77 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Kit-A/C; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator Kit, A/C Evaporator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Evaporator Core Part Number: 52477813
Product Specifications
- Other Name: Evaporator Kit, Air Conditioner Evaporator; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator Kit, A/C Evaporator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Evaporator Core Part Number: 3092064
Product Specifications
- Other Name: A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator, A/C Evaporator; Core, A/C Evaporator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, Sport, Z28 | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Evaporator Core Part Number: 52474506
Product Specifications
- Other Name: Evaporator Assembly, A/C; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator, A/C Evaporator
- Replaces: 52472593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Evaporator Core Part Number: 52474503
Product Specifications
- Other Name: Evaporator Assembly, A/C; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator, A/C Evaporator
- Replaces: 52467019, 52462560
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, Z28 | 6 Cyl 3.4 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Evaporator Core Part Number: 52453621
Product Specifications
- Other Name: Evaporator, Air Conditioner Evaporator; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator, A/C Evaporator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chevrolet Camaro | Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Evaporator Core Part Number: 52451401
Product Specifications
- Other Name: Evaporator, Air Conditioner Evaporator; A/C Evaporator Core Repair Kit; A/C Evaporator; Core, A/C Evaporator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1989 Chevrolet Camaro | Base, Iroc-Z, RS | 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro Evaporator

Want to cut long-term maintenance and repair costs? Choose OEM Evaporator. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Evaporator includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Evaporator is the part that belongs to the air conditioning system Chevrolet Camaro models which gaining popularity due to its reliability and power. This single yet crucial component is an object of the process converting the liquid refrigerant under high pressure into the gas providing cool air for passengers' comfort and adding more pleasure to the ride. Many Chevrolet Camaro models have installed this A/C Evaporator in their production run thus having a standard design that focuses on efficiently cooling the car and providing comfort to its occupants. Its compatibility covers several generations of the Camaro and thus any driver can have a good ride regardless the model that is being driven. Evaporator is not only relevant to a vehicle's performance, but it also has a function of safety by regulating the internal temperature, which can become dangerous in certain conditions. Evaporator has some of the optimal characteristics that distinguish it from other auto market products, for example, High durability is one of the distinctive features of Camaro Evaporator, which provides excellent performance to cars in extreme conditions. seeing that the Camaro has robust engine choices with the V6 and V8 prospects, the Evaporator augments the performance of the car in that it provides the cabin with pleasant temperatures, even during power drives. In conclusion, Evaporator is a new achievement of Chevrolet to improve the car's quality and performance or ensure the brand's image as a car manufacturer of high-tech and safe vehicles.

Chevrolet Camaro Evaporator Parts Questions & Experts Answers

Evaporator Core
52477813
Q: How to replace the evaporator core on Chevrolet Camaro?
A:
The first step towards replacing the Evaporator core is to drain engine coolant while recovering the refrigerant. Begin by detaching the Heater Core and you should remove the temperature control cable bolt along with the cable from the module. The nex step involves taking off the accumulator bolt at the module while discarding the o-ring seal. You should next uninstall the air conditioning (NC) Evaporator tube bolt from the module while disposing of the o-ring seal. The heater rear case requires removal of its bolts before dropping it to free the upper case clip for complete separation. Use a small hand saw to cut the perforated part of the hvac Evaporator module for reusing purposes while setting up a mat underneath on the passenger floor to catch any water leak. Users must remove the a/c Evaporator bracket nut followed by the bracket before taking out bolts located on the engine compartment side of the a/c Evaporator upper and lower case to create a slight opening. After removing the Evaporator seal and the Evaporator you should transfer the Evaporator air filter to the new part. Place the new a/c Evaporator as well as a new a/c Evaporator seal while applying sealer between the Evaporator upper and lower case but avoid using epoxy glue. Secure the bolts to the engine compartment side of the a/c Evaporator upper and lower case while tightening them to 2 n.m (18 in). Reinstall the a/c Evaporator bracket by securing its bracket bolt at 2 nm torque. Set the perforated portion of the Evaporator module in place and bond it with epoxy glue while waiting for the adhesive to dry. A watertight condition requires you to grade the sealant from both the interior and exterior surfaces. Installation of the heater rear case begins with sliding it upward to let the upper clip engage followed by snap engagement on the left edge to the distributor case while installing bolts which require a torque setting of 2.0 n.m (18 lb in). Fasten the new o-ring seal first then install and tighten the a/c Evaporator tube bolt at the module to 16 n.m (12 lb ft). Fasten the module with another new o-ring seal before installing the accumulator bolt. Then tighten it to 16 n.m (12 lb ft). Use the bolt to connect the temperature control cable on the module while tightening it to 1.9 n.m (17 lb in). Put back the Heater Core then recharge the refrigerant before filling up the cooling system.