OEM Chevrolet Classic Antenna Cable

Chevrolet Classic Antenna Cable Parts Questions & Experts Answers

• Antenna Cable
  15383103
  Q: How to Replace an Antenna Cable on Chevrolet Classic?

  A: Start Antenna Cable replacement by removing the passenger side carpet retainer then the center pillar lower trim panel after opening the passenger door. First accessible the wiring harness through carpet adjustments then disconnect the coaxial Antenna Cable from the antenna extension lead and trim the visible end of the coaxial Antenna Cable . After removing the carpet you can reach the Antenna Base through the rear compartment opening. Disconnect the coaxial antenna lead from the Antenna Base and cut off the visible end of the coaxial Antenna Cable. During installation mount the new coaxial Antenna Cable into the vehicle by securing the antenna extension cable to intervals of the main wiring harness at least every 150 mm (6 in) with electrical tape. Complete the Antenna Base connection with the coaxial antenna lead while you reposition the carpet then finish by closing the rear compartment lid. Connect the coaxial Antenna Cable to the antenna extension lead after securing the main body wiring harness and coaxial cable with carpet. Then replace the center pillar lower trim panel and passenger side carpet retainer before shutting the passenger door.