Other Name: Module, Mobile Telephone Radio; Receiver; Transceiver
Replaces: 20782642, 25965168, 20830942
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2009-2010 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
| Page 1 of 2 |Next >
1-20 of 23 Results
Chevrolet Colorado Body Control Module
Our website offers an extensive catalog of genuine Chevrolet Colorado Body Control Module at unbeatable prices. Every OEM Chevrolet Colorado Body Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Colorado Body Control Module Parts Questions & Experts Answers
Q: How to replace the Body Control Module (BCM) on Chevrolet Colorado?
A: Use the off mode on the Ignition Switch before working on the Body Control Module (BCM). Start by taking off the panel on the right side of the front hinge pillar. Pull apart both the bcm and i/p wiring system main cables from their respective connectors. Undo the fastener that attaches the body wiring harness electrical connector to the bcm before taking out its two mounting fasteners to the hinge pillar. You can easily detach the bcm when you open the integral lock and slide it out from the vehicle through the pillar hinge. Put the bcm into position in the vehicle and secure it to its place on the hinge pillar through the integrated tab. Fasten two parts first then connect the body wiring harness electrical connector to the bcm. Press the i/p wiring harness electrical connector onto the bcm before connecting the body wiring harness electrical connector to the same unit. Install the right front hinge pillar trim before ending your process. A replacement bcm needs proper programming during installation.