What Tools Are Required to Service and Repair the Rear Crankshaft Seal and Housing on Chevrolet Colorado?

The following tools are required to service and repair the crankshaft main bearing seal, in other words for crankshaft rear oil seal and housing replacement: j 8092 driver handle (J 8092) and j 44215 rear seal installer (J 44215). First, remove the Flywheel from the two bolts restraining the Oil Pan to crackshaft rear oil seal housing, and then crackshaft rear oil seal housing bolts. Make two bolts inserted into the threaded hollows to serve as jack screws and tighten them equally to cause the freeing of the crankshaft rear oil seal housing from the engine block and Oil Pan and the removal of housing of the two bolts from the jack screws hollows do not damage the seal bore while retracting and discarding the crankshaft rear oil seal from the housing with the use of hammer and punch. Clean and inspect the crankshaft rear oil seal housing along with the sealing surfaces of the engine block and the Oil Pan. Use a 3 mm (0.12 inch) bead of sealer gm p/n 12378521 (Canadian P/N 88901148) on the crankshaft rear oil seal housing where it interfaces with the engine block, where it interfaces with the Oil Pan, and the interface of Oil Pan with location of crankshaft rear oil seal housing, in not more than 10 minutes after applying the sealer on the crankshaft rear oil seal housing. Line up the housing with the right alignment dowel tilting the left up to just a little while checking the alignment with the left dowel then press the housing against the engine block into place. Install the crankshaft rear oil seal housing bolts as well as the two Oil Pan bolts and tighten both to 10 nm (89 inch lbs.). Lubricate the lip of crankshaft rear oil seal with clean engine oil lightly and then place the plastic installation sleeve which is supplied with new seal facing the crankshaft, then install the crankshaft rear oil seal into the housing with the j 44215 and the j 8092 by using a hammer to ensure that the spring side of the seal is facing the engine and installing squarely till bottom out on the housing. Finally, reinstall the Flywheel.

How to replace the front crankshaft seal on Chevrolet Colorado?

The first step for crankshaft front oil seal replacement involves taking off the crankshaft balancer. The appropriate tool should be used to extract the crankshaft front oil seal from the engine front cover and crankshaft without causing any damage. Discard the old seal afterwards. Before installing the new crankshaft front oil seal users must apply engine oil to its outside diameter while utilizing the Front Seal Installer (J 45951). Switching to the crankshaft balancer after you remove the Front Seal Installer (J 45951).

OEM Chevrolet Colorado Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Crankshaft Seals found

View related parts
Chevrolet Colorado Rear Main Seal, Green Line Part Number: 12591866
$22.96 MSRP: $39.10
You Save: $16.14 (42%)
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Engine Crankshaft Seal; Crankshaft Seal
- Position: Rear
- Replaces: 90298408, 90325572, 90280462, 90354378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 Chevrolet Colorado | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS
View related parts
Chevrolet Colorado Rear Main Seal Part Number: 89060436
$24.24 MSRP: $39.93
You Save: $15.69 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal Kit, Engine Rear Main Bearing; Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 12550574, 12585671, 89018162
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Rear Main Seal Part Number: 89018205
$22.51 MSRP: $37.09
You Save: $14.58 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 12568124
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Colorado Oil Seal Part Number: 89017622
$17.11 MSRP: $28.18
You Save: $11.07 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Engine Rear Main Bearing; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Engine Front Cover & Crankshaft Seal.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Colorado Rear Main Seal Part Number: 12637710
$42.94 MSRP: $73.74
You Save: $30.80 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal; Rear Main Seal Gasket; Rear Main Seal Retainer
- Position: Rear
- Replaces: 12608748, 12620955, 12592243, 12592242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chevrolet Colorado | LT, WT, Z71 | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Crankshaft Seal, Front Part Number: 12626923
$19.87 MSRP: $32.73
You Save: $12.86 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Crankshaft Front Oil; Front Crank Seal; Front Seal; Seal, Engine Front Cover & Crankshaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 Chevrolet Colorado | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS
View related parts
Chevrolet Colorado Rear Main Seal Part Number: 12625417
$20.64 MSRP: $34.01
You Save: $13.37 (40%)
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 Chevrolet Colorado | LT, WT, Z71, ZR2 | 4 Cyl 2.8 L DIESEL
View related parts
Chevrolet Colorado Oil Seal, Front Part Number: 12608750
$9.22 MSRP: $15.19
You Save: $5.97 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Crankshaft Seal; Front Crank Seal; Front Seal; Belt Tensioner Seal
- Position: Front
- Replaces: 12592355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chevrolet Colorado | LT, WT, Z71 | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Front Crank Seal Part Number: 12642203
$12.23 MSRP: $22.96
You Save: $10.73 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Crankshaft Front Oil; Seal, Engine Front Cover & Crankshaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 Chevrolet Colorado | LT, WT, Z71, ZR2 | 4 Cyl 2.8 L DIESEL
View related parts
Chevrolet Colorado Crankshaft Seal, Front Part Number: 12654010
$4.69 MSRP: $7.72
You Save: $3.03 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Assembly-Crankshaft Front Oil; Front Crank Seal; Front Seal; Seal, Engine Front Cover & Crankshaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 Chevrolet Colorado | LT, WT, Z71, ZR2 | 6 Cyl 3.6 L GAS

Chevrolet Colorado Crankshaft Seal

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Seal. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Colorado parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Colorado Crankshaft Seal includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Crankshaft Seal product is used in the Chevrolet Colorado models as a part that is mounted at the front of the vehicle's engine to prevent penetration of oil from the crankcase. Usually made of metal and rubber, this round seal is of great importance in the provision of lubrication services to the engine with a view of decreasing friction and wear on the engine's parts. Down the line there could be some issues related to the Crankshaft Seal on a Chevrolet Colorado, especially numerous miles or oil leakages. It is important that the Crankshaft Seal is checked periodically and replaced as soon as it is deemed suitable to do so to ensure that the engine runs smoothly as well as to prevent any type of damage.

Chevrolet Colorado Crankshaft Seal Parts Questions & Experts Answers

Rear Main Seal
89018205
Q: What Tools Are Required to Service and Repair the Rear Crankshaft Seal and Housing on Chevrolet Colorado?
A:
The following tools are required to service and repair the crankshaft main bearing seal, in other words for crankshaft rear oil seal and housing replacement: j 8092 driver handle (J 8092) and j 44215 rear seal installer (J 44215). First, remove the Flywheel from the two bolts restraining the Oil Pan to crackshaft rear oil seal housing, and then crackshaft rear oil seal housing bolts. Make two bolts inserted into the threaded hollows to serve as jack screws and tighten them equally to cause the freeing of the crankshaft rear oil seal housing from the engine block and Oil Pan and the removal of housing of the two bolts from the jack screws hollows do not damage the seal bore while retracting and discarding the crankshaft rear oil seal from the housing with the use of hammer and punch. Clean and inspect the crankshaft rear oil seal housing along with the sealing surfaces of the engine block and the Oil Pan. Use a 3 mm (0.12 inch) bead of sealer gm p/n 12378521 (Canadian P/N 88901148) on the crankshaft rear oil seal housing where it interfaces with the engine block, where it interfaces with the Oil Pan, and the interface of Oil Pan with location of crankshaft rear oil seal housing, in not more than 10 minutes after applying the sealer on the crankshaft rear oil seal housing. Line up the housing with the right alignment dowel tilting the left up to just a little while checking the alignment with the left dowel then press the housing against the engine block into place. Install the crankshaft rear oil seal housing bolts as well as the two Oil Pan bolts and tighten both to 10 nm (89 inch lbs.). Lubricate the lip of crankshaft rear oil seal with clean engine oil lightly and then place the plastic installation sleeve which is supplied with new seal facing the crankshaft, then install the crankshaft rear oil seal into the housing with the j 44215 and the j 8092 by using a hammer to ensure that the spring side of the seal is facing the engine and installing squarely till bottom out on the housing. Finally, reinstall the Flywheel.
Oil Seal
89017622
Q: How to replace the front crankshaft seal on Chevrolet Colorado?
A:
The first step for crankshaft front oil seal replacement involves taking off the crankshaft balancer. The appropriate tool should be used to extract the crankshaft front oil seal from the engine front cover and crankshaft without causing any damage. Discard the old seal afterwards. Before installing the new crankshaft front oil seal users must apply engine oil to its outside diameter while utilizing the Front Seal Installer (J 45951). Switching to the crankshaft balancer after you remove the Front Seal Installer (J 45951).