How to replace the outer CV Boot and CV Joint of the rear wheel drive shaft on Chevrolet Equinox?

Begin by removing the wheel drive shaft from the vehicle before securing it in a soft-jawed vice to prevent damaging the inboard or outboard boot sealing surface. To replace a low-profile boot clamp shaft start by discarding both the outer boot clamp and inner boot clamp of the CV joint boot before removing it from the CV joint housing. The boot clamp assembly on shafts with ear type clamps should have the outer clamp and inner clamp removed from the CV joint boot before extracting the CV joint with a hammer and wooden block tool from the wheel drive shaft. The wheel drive shaft retaining ring must be removed with J 8059 followed by removing the CV joint boot. A CV joint needs replacement when it runs dry of lubrication or shows signs of contamination. When assembling the boot and clamp to the wheel drive shaft you should avoid crimping while making sure the boot rests inside the groove of the shaft. Use J 8059 to install the retaining ring before setting the boot clamp with J 35910 to obtain a 2.15 mm (0.085 in) gap. Press down the retaining ring into its groove to permit installation of the inner CV joint with precise contact against the ring. The wheel drive shaft needs a block of wood along with a hammer to install the CV joint before adding lubricant half into the boot and the other half into the joint and clearing extra lubricant. J 35910 should be used to close the boot clamp when working alongside a torque or ratchet wrench and a breaker bar until the gap reaches 1.9 mm (0.070 in). After that, perform 4 to 5 circular movements with the CV joint to disperse the lubricant. Put away the wheel drive shaft from the vise before reinstalling it.

OEM Chevrolet Equinox CV Joint

CV Joint Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 CV Joints found

View related parts
Chevrolet Equinox Inner CV Joint, Rear Part Number: 22724177
$11.56 MSRP: $91.76
You Save: $80.20 (88%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Kit, Rear Axle Universal Joint; CV Joint; Outer CV Joint; Inner Joint Assembly; Outer Joint Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Outer CV Joint, Front Part Number: 19150281
$208.07 MSRP: $330.36
You Save: $122.29 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Wheel Drive Axle; CV Joint; Outer Joint Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Equinox | LT, LTZ | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Chevrolet Equinox Inner CV Joint, Rear Part Number: 19149872
$63.87 MSRP: $105.20
You Save: $41.33 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Rear Axle Shaft; CV Joint; Inner Joint
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Outer CV Joint, Rear Part Number: 19149871
$97.55 MSRP: $152.81
You Save: $55.26 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Rear Axle Shaft; CV Joint; Outer Joint
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Inner CV Joint, Front Passenger Side Part Number: 15855632
$189.93 MSRP: $312.89
You Save: $122.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Wheel Drive Shaft Tri-Pot; CV Joint; CV Joint Kit; Inner Joint Assembly; Joint, Front Wheel Drive Axle; Joint, Front Axle U Joint
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Equinox | LT, LTZ, Sport | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Inner CV Joint, Front Driver Side Part Number: 15855622
$217.88 MSRP: $345.92
You Save: $128.04 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Wheel Drive Shaft Tri-Pot; CV Joint; CV Joint Kit; Inner Joint Assembly; Joint, Front Wheel Drive Axle; Joint, Front Axle U Joint
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Equinox | LT, LTZ, Sport | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Inner CV Joint, Rear Part Number: 22724176
Product Specifications
- Other Name: Joint Kit, Rear Axle Universal Joint; CV Joint; Outer CV Joint; Inner Joint Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Outer CV Joint Part Number: 22720721
Product Specifications
- Other Name: Outer Joint Assembly; Joint Kit, Front Wheel Drive Axle; CV Joint
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Inner CV Joint, Front Passenger Side Part Number: 22674179
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Axle; CV Joint; CV Joint Kit; Inner Joint Assembly
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008, 2005-2006 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Inner CV Joint, Front Driver Side Part Number: 22674181
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Axle; CV Joint; Inner Joint Assembly
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS

Chevrolet Equinox CV Joint

Want to cut long-term maintenance and repair costs? Choose OEM CV Joint. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Equinox parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Equinox CV Joint includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The CV Joint in Chevrolet Equinox vehicles is a very significant assembly that enables the effective transmission of torque from the power train mechanism to the drive wheels steadily. These joints are used in front wheel drive vehicles, and in today's rear wheel drive vehicles that incorporate independent suspensions. In Equinox vehicles, there are different kinds of CV Joints; Rzeppa at the outer end of the axle and tripod and double offset at the inner side. These joints are tilted at various angles and afford the required overhauls in the length of shaft during the suspension dynamics. The flexible rubber boots which enclose the CV Joints are the most frequent culprits of the joint failure hence should be inspected more frequently for any signs of wear.

Chevrolet Equinox CV Joint Parts Questions & Experts Answers

Inner CV Joint, Front Driver Side
15855622
Q: How to replace the outer CV Boot and CV Joint of the rear wheel drive shaft on Chevrolet Equinox?
A:
Begin by removing the wheel drive shaft from the vehicle before securing it in a soft-jawed vice to prevent damaging the inboard or outboard boot sealing surface. To replace a low-profile boot clamp shaft start by discarding both the outer boot clamp and inner boot clamp of the CV joint boot before removing it from the CV joint housing. The boot clamp assembly on shafts with ear type clamps should have the outer clamp and inner clamp removed from the CV joint boot before extracting the CV joint with a hammer and wooden block tool from the wheel drive shaft. The wheel drive shaft retaining ring must be removed with J 8059 followed by removing the CV joint boot. A CV joint needs replacement when it runs dry of lubrication or shows signs of contamination. When assembling the boot and clamp to the wheel drive shaft you should avoid crimping while making sure the boot rests inside the groove of the shaft. Use J 8059 to install the retaining ring before setting the boot clamp with J 35910 to obtain a 2.15 mm (0.085 in) gap. Press down the retaining ring into its groove to permit installation of the inner CV joint with precise contact against the ring. The wheel drive shaft needs a block of wood along with a hammer to install the CV joint before adding lubricant half into the boot and the other half into the joint and clearing extra lubricant. J 35910 should be used to close the boot clamp when working alongside a torque or ratchet wrench and a breaker bar until the gap reaches 1.9 mm (0.070 in). After that, perform 4 to 5 circular movements with the CV joint to disperse the lubricant. Put away the wheel drive shaft from the vise before reinstalling it.