Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2005-2017 Chevrolet Equinox | LT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Other Name: Plate Assembly-Lift Gate Transmission Name *Exterior Brim
Replaced by: 84310387
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2017-2024 Chevrolet Equinox | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Other Name: Plate Assembly-Lift Gate Transmission Name *Exterior Brim; Plate, End Gate And Rear Door Decoration; Emblem,Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
Replaces: 84176772, 15239124, 84996815, 23463274
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2024 Chevrolet Equinox | L, LS, LT, LTZ, Premier, RS, Sport | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Other Name: Emblem Assembly-Lift Gate *Green; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration; Emblem,Rear End Panel And Tailgate
Replaces: 15910899, 20903626, 20903652, 15910900
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2011-2012 Chevrolet Equinox | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
Other Name: Emblem Assembly-Lift Gate Outside Handle *Black; Emblem,Rear End Panel And Tailgate
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2017 Chevrolet Equinox | L, LS, LT, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
| Page 1 of 2 |Next >
1-20 of 34 Results
Chevrolet Equinox Emblem
Our website offers an extensive catalog of genuine Chevrolet Equinox Emblem at unbeatable prices. Every OEM Chevrolet Equinox Emblem comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Equinox Emblem Parts Questions & Experts Answers
Q: How to properly install an emblem on a Chevrolet Equinox?
A: Starting with tape protection for the mounting surface you can move to create installation alignment marks for the Equinox liftgate emblem/nameplate replacement. Heat the emblem/nameplate under a heat gun in a circular pattern for 30 seconds from a distance of 152 mm (6 in) away from the surface. Disassemble the emblem/nameplate from the panel using a flat blade plastic tool. Categoria 3M(TM) Scotch Brite molding adhesive remover disk 3M(TM) P/N 07501 serves to remove body panel adhesive but body panels require either Varnish Makers and Painters (VMP) naphtha or a 50/50 mixture of isopropyl alcohol and water when used on plastic panels. Wipe down both the installation area with the same cleaning solution before completely drying it out. Apply tape first to mark the installation spot when the surface does not have any markings. The EQUINOX emblem/nameplate needs to be positioned at 11 mm (0.043 in) from the left liftgate edge and 160 mm (6.30 in) from the liftgate center to bottom. Position the CHEVROLET emblem/nameplate 31 mm (1.22 in) from the right edge while keeping it 160 mm (6.30 in) from the center to the bottom. Heat the surface to between 27-41°C (80-105°F) before placing the emblem/nameplate at temperatures between 29-32°C (85-90°F) without touching the adhesive side. First remove the protective liner from the emblem/nameplate before placing it accurately on the marks using steady and equal pressure. Remove the protective tape which covers the mounting surface.