First, lift the vehicle, to replace the Catalytic Converter for the dual exhaust on the right side. Take out the
Oxygen Sensor connectors as well as the
Exhaust Hanger bolts, removing the hanger from the vehicle but remember to protect yourself with protective goggles and gloves. Then unbolt the nuts that hold the
Exhaust Pipe with the flange to the Catalytic Converter pipe, then loosen the nut holding the Exhaust Pipe with the clamp to the
Muffler and then remove the Exhaust Pipe and the flange gasket. Materials required for installation include removal of oxygen sensors and installation into the new Exhaust Pipe with 42 nm (31 ft. Lbs.) of tightening. Mount a new gasket onto the Catalytic Converter pipe flange and connect the Exhaust Pipe to the vehicle and tighten using the nuts for the Catalytic Converter pipe to the Exhaust Pipe while use the flange nuts to tighten the nuts to 48 nm (35 ft. Lbs.). Tighten the Exhaust Pipe clamp nut to 54 nm (40 ft.. Lbs.) and check the exhaust system for the clearance and alignment of all components. Lastly, mount the Exhaust Hanger and bolts, torquing the bolts 17 nm (13 ft. Lbs.), and let the vehicle down.