Other Name: Oxygen Sensor; Rear Oxygen Sensor; Front Oxygen Sensor; Lower Oxygen Sensor
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2016-2020 Chevrolet Express 3500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Other Name: Sensor Assembly-Heated Oxygen (Pre-Catalyst Bank 1 Se; Sensor, Computer Control Sensors
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2016-2020 Chevrolet Express 3500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Other Name: Sensor Assembly, Heated Oxygen; Sensor, Computer Control Sensors
Replaces: 19178116, 25163080, 25312201
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 8.1 L GAS
Other Name: Sensor Assembly-Heated Oxygen (Pre-Catalyst Bank 1 Se; Upper Oxygen Sensor; Sensor, Computer Control Sensors
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2021-2024 Chevrolet Express 3500 | Base, LS, LT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 6.6 L GAS
Chevrolet Express 3500 Oxygen Sensor
Our website offers an extensive catalog of genuine Chevrolet Express 3500 Oxygen Sensor at unbeatable prices. Every OEM Chevrolet Express 3500 Oxygen Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Express 3500 Oxygen Sensor Parts Questions & Experts Answers
Q: How to replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 on Chevrolet Express 3500?
A: To replace the Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 one needs to lift the vehicle and disengage the connector for the HO2. Users should also remove the HO2S in the presence of the Oxygen Sensor Wrench (J 39194-B). When installing the new sensor, be sure to apply the threads with anti-seize compound GM P/N 5613695 if needed as this compound with the composition of liquid graphite and glass beads, to make the removal easier in the future. Mount the HO2S with the use of Oxygen Sensor Wrench (J 39194-B) and tighten up to 42 N.m (31 lb ft). Lastly, join the HO2S harness connector and lower the vehicle.