How to replace the rear wheel bearing and hub on Chevrolet HHR?

The first step to work on the rear Wheel Bearing and hub starts with raising the vehicle to a stable position. Take off the wheel unit from the vehicle body. During suspension maintenance tasks you can work on other components while keeping the brake assemblies assembled and put them safe on the side. You should first uninstall the rear Brake Drum when present then proceed by taking off the rear brake rotor if it is included. You should separate the Wheel Bearing/hub assembly by removing the mounting nuts and disconnecting it from the Trailing Arm and Brake Backing Plate. Use a tool to disconnect the wheel speed sensor electrical wires from their connection point on the Wheel Bearing/hub assembly. Reattach the wheel speed sensor electrical connector to the Wheel Bearing/hub assembly before you put it inside both the Trailing Arm and Brake Backing Plate. Fasten the Wheel Bearing/hub nuts at 45 nm (33 lb ft) before turning them with the j 45059 torque angle meter for 30 more degrees. Reinstall the rear brake components when your setup includes them. Put the tire and wheel unit in place and take away the support before you lower the automobile.

OEM Chevrolet HHR Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wheel Bearings found

View related parts
Chevrolet HHR Hub Assembly, Front
Part Number: 22728987
$96.95 MSRP: $189.85
You Save: $92.90 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Front Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Disc Brake Hardware Kit; Front Hub; Bearing, Front Wheel Inner
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Hub Assembly, Red Line, Front
Part Number: 19259801
$257.97 MSRP: $505.08
You Save: $247.11 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Front Wheel; Disc Brake Hardware Kit; Front Hub; Bearing, Front Wheel Inner
- Position: Front
- Replaces: 22715554
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Hub Assembly, Front
Part Number: 15793213
$68.21 MSRP: $310.63
You Save: $242.42 (79%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel; Wheel Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing.; Front Hub; Hub & Bearing; Bearing, Front Wheel Inner
- Position: Front
- Replaces: 22706967, 21995732
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet HHR | SS, SS Panel | 4 Cyl 2.0 L GAS
View related parts
Chevrolet HHR Hub Assembly, Rear
Part Number: 15889806
$81.99 MSRP: $242.70
You Save: $160.71 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel; Wheel Hub & Bearing Assembly; Axle Bearing.; Hub & Bearing; Hub & Bearing Assembly; Bearing, Rear Wheel
- Position: Rear
- Replaced by: 19259816
- Replaces: 22715555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Hub Assembly, Rear
Part Number: 15798483
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub; Rear Hub; Hub & Bearing; Hub & Bearing Assembly; Bearing, Rear Wheel
- Position: Rear
- Replaces: 10399802, 22721886
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet HHR | SS, SS Panel | 4 Cyl 2.0 L GAS
View related parts
Chevrolet HHR Hub Assembly, Rear
Part Number: 15889807
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel; Wheel Hub & Bearing Assembly; Axle Bearing.; Rear Hub; Hub & Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 22723647, 22706424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Chevrolet HHR Wheel Bearing

Our website offers an extensive catalog of genuine Chevrolet HHR Wheel Bearing at unbeatable prices. Every OEM Chevrolet HHR Wheel Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet HHR Wheel Bearing Parts Questions & Experts Answers

Hub Assembly, Rear
15889806
Q: How to replace the rear wheel bearing and hub on Chevrolet HHR?
A: The first step to work on the rear Wheel Bearing and hub starts with raising the vehicle to a stable position. Take off the wheel unit from the vehicle body. During suspension maintenance tasks you can work on other components while keeping the brake assemblies assembled and put them safe on the side. You should first uninstall the rear Brake Drum when present then proceed by taking off the rear brake rotor if it is included. You should separate the Wheel Bearing/hub assembly by removing the mounting nuts and disconnecting it from the Trailing Arm and Brake Backing Plate. Use a tool to disconnect the wheel speed sensor electrical wires from their connection point on the Wheel Bearing/hub assembly. Reattach the wheel speed sensor electrical connector to the Wheel Bearing/hub assembly before you put it inside both the Trailing Arm and Brake Backing Plate. Fasten the Wheel Bearing/hub nuts at 45 nm (33 lb ft) before turning them with the j 45059 torque angle meter for 30 more degrees. Reinstall the rear brake components when your setup includes them. Put the tire and wheel unit in place and take away the support before you lower the automobile.