How to replace the rear brake backing plate on Chevrolet HHR?

Start by safely elevating your car while providing support then remove the tire and wheel structure from the vehicle. Then remove both the brake shoes and Brake Drum. Follow this procedure: remove the universal spring from the Brake Backing Plate followed by the Wheel Cylinder removal. The Brake Backing Plate requires removal after releasing the rear park brake cable end fitting from the Brake Drum and extracting the wheel bearing/hub assembly. Begin installation by adding the new Brake Backing Plate then proceed with the wheel bearing/hub assembly. Position the rear park brake cable end fitting onto the Brake Backing Plate before installing the Wheel Cylinder and universal spring. The next installation step involves adding brake shoes to the system while performing drum brake adjustments. The next step involves fitting the Brake Drum and completing hydraulic brake system bleeding through manual and pressure-based methods. Finish the work by placing the tire and wheel assembly then lowering the vehicle into position.

OEM Chevrolet HHR Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Backing Plates found

View related parts
Chevrolet HHR Backing Plate, Rear Passenger Side
Part Number: 22705358
$8.46 MSRP: $11.84
You Save: $3.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet HHR | SS, SS Panel | 4 Cyl 2.0 L GAS
View related parts
Chevrolet HHR Backing Plate, Front Driver Side
Part Number: 25884779
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Backing Plate, Front Passenger Side
Part Number: 25884778
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Backing Plate, Green Line, Rear
Part Number: 22705357
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear
- Replaces: 25785110
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet HHR | SS, SS Panel | 4 Cyl 2.0 L GAS
View related parts
Chevrolet HHR Backing Plate, Passenger Side
Part Number: 25994647
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.4 L FLEX
View related parts
Chevrolet HHR Backing Plate, Driver Side
Part Number: 25994646
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.4 L FLEX
View related parts
Chevrolet HHR Backing Plate
Part Number: 15839049
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet HHR Backing Plate
Part Number: 15839048
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet HHR | LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Chevrolet HHR Brake Backing Plate

Our website offers an extensive catalog of genuine Chevrolet HHR Brake Backing Plate at unbeatable prices. Every OEM Chevrolet HHR Brake Backing Plate comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet HHR Brake Backing Plate Parts Questions & Experts Answers

Backing Plate, Rear Passenger Side
22705358
Q: How to replace the rear brake backing plate on Chevrolet HHR?
A: Start by safely elevating your car while providing support then remove the tire and wheel structure from the vehicle. Then remove both the Brake Shoes and Brake Drum. Follow this procedure: remove the universal spring from the Brake Backing Plate followed by the Wheel Cylinder removal. The Brake Backing Plate requires removal after releasing the rear park brake cable end fitting from the Brake Drum and extracting the wheel bearing/hub assembly. Begin installation by adding the new Brake Backing Plate then proceed with the wheel bearing/hub assembly. Position the rear park brake cable end fitting onto the Brake Backing Plate before installing the Wheel Cylinder and universal spring. The next installation step involves adding brake shoes to the system while performing drum brake adjustments. The next step involves fitting the Brake Drum and completing hydraulic brake system bleeding through manual and pressure-based methods. Finish the work by placing the tire and wheel assembly then lowering the vehicle into position.

Related Chevrolet HHR Parts

Browse Chevrolet HHR Brake Backing Plate by Years

2011 2010 2009 2008 2007 2006