Make sure this part fits

GM 15839049
Backing Plate

2003-2010 GM

Customer Questions & Expert Answers (11)
GM 15839049 Backing Plate
  • Part Description
    Plate, Brake Flange/Backing; Brake Dust Shield
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15839049
    Part DescriptionPlate, Brake Flange/Backing; Brake Dust Shield
    Item Dimensions12.1 x 12.0 x 4.0 inches
    Item Weight3.30 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15839049
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2006-2008 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2004-2008 Chevrolet MalibuBase, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2007-2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2003-2007 Saturn Ion1, 2, 3, Red Line4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15839049 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15839049 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the rear brake backing plate for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be taken out before finally removing the brake backing plate for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    The wheel bearing/hub assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What needs to be removed from the brake backing plate for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Remove the universal spring and then the wheel cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step in the installation process for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Attach the new rear brake backing plate to the rear axle assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be removed after the tire and wheel assembly for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Take off the brake drum and the brake shoes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What adjustments need to be made after installing the brake shoes for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Adjust the drum brakes, install the brake drum, and bleed the hydraulic brake system (Pressure) and (Manual).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the next step after removing the wheel cylinder for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Release the rear park brake cable end fitting from the drum brake backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What needs to be removed before taking out the brake backing plate for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Remove the wheel bearing/hub assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    How do you secure the upper control arm for the 2005 Chevrolet Malibu? Posted by Customer
    A:
    Install the upper control arm bolt and nut, tightening the nut to 180 Nm (133 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    How do you prevent fluid loss and contamination when removing the brake hose for the 2007 Chevrolet Malibu? Posted by Customer
    A:
    Remove the brake hose banjo bolt along with the 2 copper gaskets, capping or plugging the exposed brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15839049, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15839049 Backing Plate. It is sometimes referred to as GM Brake Backing Plate, GM Brake Dust Shields. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15839049 Backing Plate. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery